sam sneed wrote: > I'm trying to force an interface to 10 MB full duplex on a 4700 router.
No can do, unless it's an NP-2E-FDX. If so, the command (in interface config) would be 'full-duplex' See http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis4000/2e_fdx.htm for that. > The > docemntation for 4700 is not on cisco's site. Does anyone know the command. It is. See the link above & one level up. Most of the rest is IOS docs. > Also doing a show int does not tell whether is running at half or full > duplex and the speed. That's because the NP you have (NP-2E or NP-6E?) can't do anything but 10/half, so it doesn't display it. There would be a 'hdx' or 'fdx' if it did, something like this: Encapsulation ARPA, loopback not set, keepalive not set, hdx, 100BaseTX This is from a FE interface, obviously, but it should look similar with a NP-2E-FDX. Regards, Marco. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44854&t=44844 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
