Not yet, hopefully soon. The only Firewall hardware platform that I'm aware of that supports it is the Nokia with Checkpoint.
-----Original Message----- From: Jeffrey Reed [mailto:[EMAIL PROTECTED]] Sent: 17 July 2002 16:33 To: [EMAIL PROTECTED] Subject: RE: PIX Design Considerations [7:48979] Can you do a dot1q trunk into a PIX? Jeffrey Reed Classic Networking, Inc. Cell 717-805-5536 Office 717-737-8586 FAX 717-737-0290 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 17, 2002 10:43 AM To: [EMAIL PROTECTED] Subject: FW: PIX Design Considerations [7:48979] I would say place an internal router behind the pix so I can route Your internal network, or vlans's that's the way we design it here -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Jeffrey Reed Sent: Tuesday, July 16, 2002 7:19 PM To: [EMAIL PROTECTED] Subject: PIX Design Considerations [7:48979] Im still pretty green with PIX in general and was talking today about introducing a PIX into an existing network. The customer has a router (not controlled by them) that has three public class C subnets defined. They are not using VLANs, so the router has an interface and two sub-interfaces going into a switches network. We want to put the PIX in between the outside router and the LAN. I know this group has said several times the PIX is not a router. Do I need to have another router between the PIX and the LAN to perform routing between subnets? I assume the PIX will not facilitate routing between the internal subnets. Can you define multiple interfaces on the internal interface of the PIX if we didnt need to route between the internal VLANs? Any suggestions would be appreciated! Jeffrey Reed Classic Networking, Inc. Cell 717-805-5536 Office 717-737-8586 FAX 717-737-0290 Confidential e-mail for addressee only. Access to this e-mail by anyone else is unauthorized. If you have received this message in error, please notify the sender immediately by reply e-mail and destroy the original communication. 1 ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. For more information contact [EMAIL PROTECTED] phone + 353 1 4093000 fax + 353 1 4093001 ********************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49033&t=48979 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
