So your saying that you configured the serial interface with ip unnumbered, sourcing the ethernet interface of the repective routers. If you shut down the ethernet you can still access the remote router over the serial??
This is something new or have I been out of the unnumbered game too long!! Dave richard dumoulin wrote: > > Peter , > > The book says clearly that the interface is pingable. Even more, I have > tried it and it really works. I just took two routers connected by > back_to_back serial cables with IP unnumbered configured on both. When I > unplugg the Lan interface of one them, this router is still reachable by the > IP address. > > Regards. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49393&t=49347 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
