Thank you, I had some concept errors. I read again the docs and I understud it.
Thank you again. Juan ----- Original Message ----- From: "jdr" To: Sent: Tuesday, September 10, 2002 10:52 PM Subject: Newby ipsec question. [7:53028] > Hello, > I'm sorry for ask this stupid question, but I can't find a answer > > > I'm working on this scenario: > > LAN-to-LAN ipsec conections, hub and spoke topology. > A central site with a 7100 router,10 remote sites with 806 routers (ADSL or > cable connections). > > > 1.1.1.0-- (7100 Router)- 11.1.1.1 ------- INTERNET ---------- X.X.X.X > (806 Router)-- 2.2.2.0 > | > | > - > --------- Y.Y.Y.Y (806 Router)-- 2.2.3.0 > > > My problem is that the 806 public IPs are dynamic and it can change every > time that the 806 router restart. > > If the remote site IPs are dynamic, how do I can route the traffic from the > central site to the branch ofices? > > I can configure the central router to accept dynamic connections with a > preshared Key (for example), but Idon't know configure the central site to > reach the private LANs of the remotes sites after the connections are up. > > The CISCO examples always use a route to the remote LAN through the public > IP (X.X.X.X) of the remote sites, but I can't use it on this scenario > because it could change . > > > Thank you for your help and your patience (as I tell you it was a stupid > question). > > > > Juan Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53138&t=53028 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
