Ah, ok thanks, I read this a bit more carefully :)....
http://www.cisco.com/warp/public/110/upgrade.shtml
Cheers,
Symon
-----Original Message-----
From: Ole D Jensen [mailto:[EMAIL PROTECTED]]
Sent: Fri 20/09/2002 10:35 p.m.
To: [EMAIL PROTECTED]
Cc:
Subject: RE: PIX Upgrade [7:53747]
Symon,
It depends on what version you currently have on your PIX, and if it's
with (520) or without a floppy.
If you have FOS version 5.1 or later, you can do it with TFTP. If you have
an older version, you must go into monitor mode as you did.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNP, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Symon Thurlow"
Sent by: [EMAIL PROTECTED]
09/20/2002 04:06 PM
Please respond to "Symon Thurlow"
To: [EMAIL PROTECTED]
cc:
Subject: RE: PIX Upgrade [7:53747]
No, you have to go to rom monitor to do it
Break into rom monitor then
addr ipaddressofpix
serv ipaddressoftftpserver
file pix622.bin
tftp
it will load then reboot. You should then upgrade PDM, which you do the
traditional way.
I just did this a couple of days ago and it worked fine.
Symon
-----Original Message-----
From: Robert Edmonds [mailto:[EMAIL PROTECTED]]
Sent: 20 September 2002 21:34
To: [EMAIL PROTECTED]
Subject: PIX Upgrade [7:53747]
To upgrade the PIX to a newer software version, do you just do
copy tftp 172.16.6.100/pix622.bin flash
and then reload?
Sounds like I'm missing something.
=============================================
This email has been content filtered and
subject to spam filtering. If you consider
this email is unsolicited please forward
the email to [EMAIL PROTECTED] and
request that the sender's domain be
blocked from sending any further emails.
=============================================
=============================================
This email has been content filtered and
subject to spam filtering. If you consider
this email is unsolicited please forward
the email to [EMAIL PROTECTED] and
request that the sender's domain be
blocked from sending any further emails.
=============================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53770&t=53747
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
