You don't need a new activation key for the upgrade. Act key is bound to a serial number, so unless you change your PIX, or require some new features enabled on the PIX, you don't need new act key. License key is software independent. 6.2.2 is very stable code. I don't see you having problem with it. It has quit a few new feature that are very useful. 6.3 code will not be available until 1st quarter 2003. And of course no need to go into a monitor mode :-).
The OS upgrade on the PIX sounds pretty simple because it's just .... that simple... -- Lidiya White -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Roberts, Larry Sent: Friday, September 20, 2002 5:43 PM To: [EMAIL PROTECTED] Subject: RE: PIX Upgrade [7:53747] Uhmm,, no not true depending on version. I just upgraded from 6.1(4) to 6.2 and in fact used copy tftp flash: I went from 5.2(1) TO 5.2(5) via this method as well. Things to watch for though are version transitions. Going from 5.x to 6.x will require a new activation code. You can get a DES version key by sending your information to [EMAIL PROTECTED] and tell them what version you are going to. They need the serial number and I believe the current activation key. On older versions of code, you need to step-up one revision at a time. This is not the case with newer versions, however it is recommended if you are going more that a couple revisions ahead. Thanks Larry -----Original Message----- From: Symon Thurlow [mailto:[EMAIL PROTECTED]] Sent: Friday, September 20, 2002 4:07 PM To: [EMAIL PROTECTED] Subject: RE: PIX Upgrade [7:53747] No, you have to go to rom monitor to do it Break into rom monitor then addr ipaddressofpix serv ipaddressoftftpserver file pix622.bin tftp it will load then reboot. You should then upgrade PDM, which you do the traditional way. I just did this a couple of days ago and it worked fine. Symon -----Original Message----- From: Robert Edmonds [mailto:[EMAIL PROTECTED]] Sent: 20 September 2002 21:34 To: [EMAIL PROTECTED] Subject: PIX Upgrade [7:53747] To upgrade the PIX to a newer software version, do you just do copy tftp 172.16.6.100/pix622.bin flash and then reload? Sounds like I'm missing something. ============================================= This email has been content filtered and subject to spam filtering. If you consider this email is unsolicited please forward the email to [EMAIL PROTECTED] and request that the sender's domain be blocked from sending any further emails. ============================================= Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53779&t=53747 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
