what you have provided in your configuration appears to be correct. do you have CEF turned on?
how do you know it's not working? do you have a lot of non ip traffic on your network? ( rate limiting does not effect non ip traffic ) are you sure you are pushing ip traffic through at a rate greater than 38 meg? what are you doing to test? -- ""sisco"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > i was trying to limit my 45Meg bandwidth to 38Meg using a rate-limit > command,but it doesn't work! > > interface ATM4/1/0.1 point-to-point > description DS3 > bandwidth 45000 > ip address xxxxxxxx 255.255.255.252 > ip access-group 153 in > ip access-group 111 out > no ip unreachables > no ip proxy-arp > rate-limit input 38000000 84000 84000 conform-action transmit exceed-action > drop > pvc 19/555 > encapsulation aal5snap > > thnks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54996&t=54987 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
