""Schwantz"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Why don't you use ATM's inherent policing attributes like vbr-nrt ?
CL: I'm asking because I don't know - for an ATM edge device, like the router in question, can you configure various ATM characteristics like this even if they do not match the ATM service type that your carrier has provided on their ATM switch? > > Schwantz > > ""Chuck's Long Road"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > what you have provided in your configuration appears to be correct. > > > > do you have CEF turned on? > > > > how do you know it's not working? do you have a lot of non ip traffic on > > your network? ( rate limiting does not effect non ip traffic ) are you > sure > > you are pushing ip traffic through at a rate greater than 38 meg? what are > > you doing to test? > > > > -- > > > > > > > > > > ""sisco"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > i was trying to limit my 45Meg bandwidth to 38Meg using a rate-limit > > > command,but it doesn't work! > > > > > > interface ATM4/1/0.1 point-to-point > > > description DS3 > > > bandwidth 45000 > > > ip address xxxxxxxx 255.255.255.252 > > > ip access-group 153 in > > > ip access-group 111 out > > > no ip unreachables > > > no ip proxy-arp > > > rate-limit input 38000000 84000 84000 conform-action transmit > > exceed-action > > > drop > > > pvc 19/555 > > > encapsulation aal5snap > > > > > > thnks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55005&t=54987 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
