Why don't you use ATM's inherent policing attributes like vbr-nrt ? Schwantz
""Chuck's Long Road"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > what you have provided in your configuration appears to be correct. > > do you have CEF turned on? > > how do you know it's not working? do you have a lot of non ip traffic on > your network? ( rate limiting does not effect non ip traffic ) are you sure > you are pushing ip traffic through at a rate greater than 38 meg? what are > you doing to test? > > -- > > > > > ""sisco"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > i was trying to limit my 45Meg bandwidth to 38Meg using a rate-limit > > command,but it doesn't work! > > > > interface ATM4/1/0.1 point-to-point > > description DS3 > > bandwidth 45000 > > ip address xxxxxxxx 255.255.255.252 > > ip access-group 153 in > > ip access-group 111 out > > no ip unreachables > > no ip proxy-arp > > rate-limit input 38000000 84000 84000 conform-action transmit > exceed-action > > drop > > pvc 19/555 > > encapsulation aal5snap > > > > thnks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54999&t=54987 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
