Here's some links on CCO: pad pad pad Avoiding HSRP Instability in a Switching Environment with Various Router Platforms http://www.cisco.com/warp/public/619/8.shtml
Understanding and Troubleshooting HSRP Problems in Catalyst Switch Networks http://www.cisco.com/warp/public/473/62.shtml > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, November 20, 2002 9:38 AM > To: [EMAIL PROTECTED] > Subject: HSRP - Cat4006 stuck in INIT state [7:57771] > > > Trying to test HSRP between 2 Cat4006s running IOS 12.1(8a)EW1. > > 'Sho standby brief' says that the vlan routing never gets > switched over to > standy router and stays in the "INIT" state. > > Rtr 1 is standby for VLAN2 > Rtr 2 is active for VLAN2 > > perform a shutdown on interface VLAN2 on rtr 2; > > 'sho stand brief' gives no ip addresses for active and > standby rtrs., but > instead both say "INIT". > > Any ideas? > > tia, > Mary Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57784&t=57771 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
