Thanks. That's exactly what I was looking for. Robert Edmonds wrote:
> I believe the command you are looking for is "ip default-gateway . > Since the 2950 is an IOS based switch, the set commands don't apply here. > > > ""J. Johnson"" wrote in message > news:[EMAIL PROTECTED] >> All, >> >> Is there a way to set a default router for a 2950 switch? Apparently > other >> 2900 switches have the "set ip route default GATEWAYADDR" command (see >> > http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2900/cgcr29k/index.ht > m >> - thanks, Priscilla) but not, as far as I can tell, on the 2950 (see >> > http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12112cea/2950cr) > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html Report misconduct and > Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64509&t=64489 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
