The gateway command works for me... See below.
Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1d, RELEASE SOFTWARE(fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Mon 17-Jun-02 18:55 by antonino Image text-base: 0x80010000, data-base: 0x804E6000 System image file is "flash:c2950-i6q4l2-mz.121-9.EA1d.bin" interface Vlan1 ip address 10.16.224.5 255.255.255.248 no ip route-cache ! ip default-gateway 10.16.224.1 ip http server Larry Letterman Network Engineer Cisco Systems ----- Original Message ----- From: J. Johnson To: [EMAIL PROTECTED] Sent: Wednesday, March 05, 2003 8:06 AM Subject: default router for 2950 switch [7:64489] All, Is there a way to set a default router for a 2950 switch? Apparently other 2900 switches have the "set ip route default GATEWAYADDR" command (see http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2900/cgcr29k/index.h tm - thanks, Priscilla) but not, as far as I can tell, on the 2950 (see http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12112cea/2950cr ). The 2950 lets you set an administrative IP address on an interface, like other 2900 switches. It seems reasonable that it should also allow a default router for that interface. James Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64510&t=64489 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
