Hi Ashish, Check the homestead log - when you configure hss_realm, homestead does an NATPTR/SVR lookup for _diameter._tcp.realm.
Tom > On Jan 20, 2015, at 8:26 AM, Ashish Maheshwari -X (ashimahe - L & T > TECHNOLOGY SERVICES LIMITED at Cisco) <[email protected]> wrote: > > Hi Merry, > > I am trying to integrate CW IMS with External Devsol HSS, I did the below > configuration as per wiki doc > > > Ø cat /etc/clearwater/config > > # HSS configuration > > hss_hostname=50.50.13.100 > > hss_realm=developingsolutions.com > > hss_port=3868 > > as we are giving static IP of HSS and both the nodes are in same subnet, > hence I thought it’s not required to set up the NAPTR/SRV records. > > But after doing the config changes and restarting the services at IMS , I am > not seeing any TCP messages flow between the HSS and IMS in tcpdump capture > at IMS even though I had made necessary changes at HSS. > > Can you please let me know is IMS supports SCTP or TCP ? so that I can do the > necessary changes at HSS if required as of now I did the changes as per TCP > in HSS. > > In case it supports TCP, can you assist me what else we need to do to make > the TCP connection up so that these two nodes communicate to each other and > also. > We stuck on this issue for a quit long time, It would be kind if we have a > web-ex session where I can share my setup for your better understanding. > > Please let me know your availability if possible so that I can book a > web-session. > > Thanks in advance. > > > Thanks & Regards, > Ashish Maheshwari > > From: Eleanor Merry [mailto:[email protected]] > Sent: 09 December 2014 23:33 > To: Ashish Maheshwari -X (ashimahe - LARSEN AND TOUBRO INFOTECH LIMITED at > Cisco); [email protected] > Subject: RE: Integration of Clearwater IMS with External HSS > > Hi Ashish, > > That’s the only configuration change you need to make. You will also need to > run ‘sudo service clearwater-infrastructure restart; sudo service homestead > stop’ to pick up this change though, and you should also set up the > appropriate NAPTR/SRV records for the hss_realm. > > The documentation you’ve referenced is out of date – I’ll fix this up. We now > support IMS AKA authentication if the P-CSCF used (not Bono) supports IMS > AKA, and there’s an external HSS that is configured to return IMS AKA > credentials. > > Do you need for the support for different authentication methods in a > particular timeframe? If so, would you like to contribute by helping to add > it? > > Ellie > > From: Ashish Maheshwari -X (ashimahe - LARSEN AND TOUBRO INFOTECH LIMITED at > Cisco) [mailto:[email protected]] > Sent: 08 December 2014 14:08 > To: > [email protected]<mailto:[email protected]> > Cc: Chinna Morampalle (cmorampa); Alok Kumar (alokuma2); Venkatesh Thangaraj > -X (venthang - ARICENT TECHNOLOGIES MAURIITIUS LIMITED at Cisco) > Subject: Integration of Clearwater IMS with External HSS > > Hi Team, > > I am tring to intgrate Clearwater IMS with External HSS, I did the changes as > mentioned in installation guide. > > > Ø cat /etc/clearwater/config > > # HSS configuration > > hss_hostname=50.50.13.100 > > hss_realm=developingsolutions.com > > hss_port=3868 > > > I just want to know is any other config change also required to do at IMS > side ......or this is only config change need to do. > > And secondly as per documents available on your site “Since Clearwater > currently only supports SIP digest authentication, details for other > authentication method (such as AKA<http://tools.ietf.org/html/rfc3310>) are > silently ignored from Multimedia-Auth responses. Other authentication methods > may be added in future.” > > Can you please let us know, is any latest release available or planned to > come soon which will support EAP-AKA or EAP-SIM kind of authentication method > as in our solution we prefer to do authentication using these two methods. > > Thanks & Regards, > Ashish Maheshwari > > From: ashish maheshwari [mailto:[email protected]] > Sent: 08 December 2014 16:53 > To: Ashish Maheshwari -X (ashimahe - LARSEN AND TOUBRO INFOTECH LIMITED at > Cisco) > Subject: Re: [Clearwater] Unable to provision subscriber on Ellis > > > Thanks And Regards, > Ashish Maheshwari > +91-8971622622 > > On Thursday, 13 November 2014 6:22 PM, ashish maheshwari > <[email protected]<mailto:[email protected]>> wrote: > > root@(none):~# monit status > monit: Cannot translate '(none)' to FQDN name -- Temporary failure in name > resolution > The Monit daemon 5.3.2 uptime: 1h 16m > > Program 'poll_sprout' > status Not monitored > monitoring status Not monitored > data collected Thu, 13 Nov 2014 04:19:16 > > Process 'sprout' > status Running > monitoring status Monitored > pid 7794 > parent pid 1 > uptime 1h 48m > children 0 > memory kilobytes 42264 > memory kilobytes total 42264 > memory percent 2.5% > memory percent total 2.5% > cpu percent 0.0% > cpu percent total 0.0% > data collected Thu, 13 Nov 2014 05:35:41 > > Program 'poll_restund' > status Status ok > monitoring status Monitored > last started Thu, 13 Nov 2014 05:35:41 > last exit value 0 > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'restund' > status Running > monitoring status Monitored > pid 8557 > parent pid 1 > uptime 1h 47m > children 0 > memory kilobytes 1388 > memory kilobytes total 1388 > memory percent 0.0% > memory percent total 0.0% > cpu percent 0.0% > cpu percent total 0.0% > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'mysql' > status Running > monitoring status Monitored > pid 7930 > parent pid 1 > uptime 1h 48m > children 0 > memory kilobytes 46296 > memory kilobytes total 46296 > memory percent 2.8% > memory percent total 2.8% > cpu percent 0.0% > cpu percent total 0.0% > unix socket response time 0.001s to /var/run/mysqld/mysqld.sock > [DEFAULT] > data collected Thu, 13 Nov 2014 05:35:41 > > Program 'poll_memcached' > status Status ok > monitoring status Monitored > last started Thu, 13 Nov 2014 05:35:41 > last exit value 0 > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'memcached' > status Running > monitoring status Monitored > pid 7976 > parent pid 1 > uptime 1h 48m > children 0 > memory kilobytes 1188 > memory kilobytes total 1188 > memory percent 0.0% > memory percent total 0.0% > cpu percent 0.0% > cpu percent total 0.0% > data collected Thu, 13 Nov 2014 05:35:41 > > Program 'poll_homestead' > status Status failed > monitoring status Monitored > last started Thu, 13 Nov 2014 05:35:41 > last exit value 1 > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'homestead' > status Does not exist > monitoring status Monitored > data collected Thu, 13 Nov 2014 05:35:41 > > Program 'poll_homestead-prov' > status Not monitored > monitoring status Not monitored > data collected Thu, 13 Nov 2014 04:19:16 > > Process 'homestead-prov' > status Not monitored > monitoring status Not monitored > data collected Thu, 13 Nov 2014 04:19:16 > > Program 'poll_homer' > status Not monitored > monitoring status Not monitored > data collected Thu, 13 Nov 2014 04:19:16 > > Process 'homer' > status Running > monitoring status Monitored > pid 8121 > parent pid 1 > uptime 1h 48m > children 0 > memory kilobytes 24244 > memory kilobytes total 24244 > memory percent 1.4% > memory percent total 1.4% > cpu percent 0.0% > cpu percent total 0.0% > data collected Thu, 13 Nov 2014 05:35:41 > > Program 'poll_ellis' > status Status ok > monitoring status Monitored > last started Thu, 13 Nov 2014 05:35:41 > last exit value 0 > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'ellis' > status Running > monitoring status Monitored > pid 22884 > parent pid 1 > uptime 1h 31m > children 2 > memory kilobytes 17956 > memory kilobytes total 62284 > memory percent 1.0% > memory percent total 3.7% > cpu percent 0.0% > cpu percent total 0.0% > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'cassandra' > status Does not exist > monitoring status Monitored > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'chronos' > status Running > monitoring status Monitored > pid 7570 > parent pid 1 > uptime 1h 48m > children 0 > memory kilobytes 20332 > memory kilobytes total 20332 > memory percent 1.2% > memory percent total 1.2% > cpu percent 0.0% > cpu percent total 0.0% > port response time 0.004s to localhost:7253/ping [HTTP via > TCP] > data collected Thu, 13 Nov 2014 05:35:41 > > Program 'poll_bono' > status Status ok > monitoring status Monitored > last started Thu, 13 Nov 2014 05:35:41 > last exit value 0 > data collected Thu, 13 Nov 2014 05:35:41 > > Process 'bono' > status Running > monitoring status Monitored > pid 7755 > parent pid 1 > uptime 1h 48m > children 0 > memory kilobytes 41952 > memory kilobytes total 41952 > memory percent 2.5% > memory percent total 2.5% > cpu percent 0.0% > cpu percent total 0.0% > data collected Thu, 13 Nov 2014 05:35:41 > > System 'system_(none)' > status Running > monitoring status Monitored > load average [1.34] [1.23] [1.23] > cpu 24.3%us 75.5%sy 0.0%wa > memory usage 347336 kB [21.0%] > swap usage 0 kB [0.0%] > data collected Thu, 13 Nov 2014 05:35:41 > > root@(none):~# > > > Thanks And Regards, > Ashish Maheshwari > +91-8971622622 > On Thursday, 6 November 2014 4:01 PM, ashish maheshwari > <[email protected]<mailto:[email protected]>> wrote: > > > Thanks And Regards, > Ashish Maheshwari > +91-8971622622 > > On Wednesday, 5 November 2014 5:43 PM, Alex Hockey > <[email protected]<mailto:[email protected]>> wrote: > > Hi Ashish, thanks for your question. > > I can't be sure, but it sounds like the homestead component of Clearwater > (the subscriber store) might not be running, or might have locked up. > > We currently have an open issue > (https://github.com/Metaswitch/crest/issues/162) that if NTP corrects the > system time by a large amount, homestead may reject all requests sent to it. > This can be cleared by rebooting the all-in-one node (log into the node and > run `sudo reboot`). > > If that doesn't fix the problem the next thing I would try is restarting > homestead. Log into the node and run `sudo service homestead-prov stop`. This > will stop the process, and monit (our monitoring layer) will automatically > restart it. > > If that doesn't work, running `sudo monit status` on the node will display a > status report of all the Clearwater processes. Would you be able to share the > output of this command? > > Thanks, > Alex. > > -----Original Message----- > From: > [email protected]<mailto:[email protected]> > > [mailto:[email protected]<mailto:[email protected]>] > On Behalf Of ashish maheshwari > Sent: 04 November 2014 13:28 > To: > [email protected]<mailto:[email protected]> > Subject: [Clearwater] Unable to provision subscriber on Ellis > > Hi All, > > I need support hence I am posting the query in open forum : > > Detail Description of query : > > I installed meta switch open source Clear water IMS on VMWhare machine using > all in one OVF installation, installation has been done now i am trying to > make a first call as per instruction given in https://github.com > <https://github.com/> , but when i am trying to access ELIIs ( a provisioning > portal) to register the user and to get the password so that the same > credentials can be given in Zoiper (SIP client) i.e.configured on Samsung > galaxy S4 , I am getting error "Failed to update the server " > Can anyone jump in and help me how can we resolve this error. > > Thanks And Regards, > Ashish Maheshwari > +91-89716226 > > _______________________________________________ > Clearwater mailing list > [email protected]<mailto:[email protected]> > http://lists.projectclearwater.org/listinfo/clearwater > > > _______________________________________________ > Clearwater mailing list > [email protected] > http://lists.projectclearwater.org/listinfo/clearwater _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
