Hello Elle, Thanks a lot Elle :)
It worked after we change the cluster settings. Thanks and Regards, Shree Duth Awasthi. On Fri, Jun 19, 2015 at 4:20 PM, Eleanor Merry <[email protected] > wrote: > Hi, > > > > Looking in the Bono logs, the WWW-Authenticate header in the 401 response > has the parameter stale=True: > > > > WWW-Authenticate: Digest > realm="11.0.0.7",nonce="078b9e1a1d596ecf",opaque="149b89ad75606ac6",stale=true,algorithm=MD5,qop="auth" > > > > Sprout can set this if it can’t find the authentication credentials in > Memcached for the subscriber (which it uses to check against the REGISTER). > In this case, it queries Homestead again for the authentication vector, > tries to store the credentials, and sends back a 401 with stale=True. > However, because you’re seeing this error repeatedly, this suggests to me > that there are some memcached errors on your Sprout node. > > > > Can you please confirm that memcached is running on Sprout, and send me > the Sprout logs? > > > > Ellie > > > > *From:* SHREE DUTH Awasthi [mailto:[email protected]] > *Sent:* 18 June 2015 20:52 > > *To:* Eleanor Merry; Ravi Chaudhary > *Cc:* [email protected] > *Subject:* Re: [Clearwater] Multi VM setup -SIP error 408 > > > > Hello Elle / All, > > > > Thanks for your help so far. > > > > We were able to succeed with the SIP call after your suggestion. The same > images we have deployed on openstack environment and associated floating > IPs and all of the services are up and running. > > > > Here again we are unable to make a SIP call using "Zoiper" may be due to > the attached continuous error logs from Bono. Any help is much appreciated. > PFA. > > > > Thanks in advance. > > > > Best Regards, > > Shree Duth Awasthi. > > > > On Thu, Apr 9, 2015 at 10:33 PM, Eleanor Merry < > [email protected]> wrote: > > Hi Shree > > > > You’ll need to change your Zoiper configuration to use your home_domain > value in /etc/clearwater/config as the domain (so use 10.90.10.104 rather > than example.com). > > > > Ellie > > > > One other thing - I've noticed you're not signed up to the mailing list. > This means your mails to the list do not automatically get posted. Would > you be able to sign up please? You can do this by following the link from > http://www.projectclearwater.org/community/. > > > > > > *From:* SHREE DUTH Awasthi [mailto:[email protected]] > *Sent:* 09 April 2015 07:28 > *To:* Eleanor Merry; Ravi Chaudhary > > > *Cc:* [email protected] > *Subject:* Re: [Clearwater] Multi VM setup -SIP error 408 > > > > Hi Elle / All, > > > > A small updation below. (Forgot to mention random password in the mail) > > > > Other values in Zoiper: > > Account Type : SIP > > user / user@host : 2010000187 (As displayed in Ellis UI) > > password:cVf5DpkTq (As displayed in Ellis UI) > > Domain / Outbound Proxy : example.com > > Account name: [email protected] > > Skip Auto detection : enabled > > Username: 2010000187 > > Password:* cVf5DpkTq* > > Caller ID Name: [email protected] > > Outbound Proxy: 10.90.10.104:5060 (<Bono-IP>:5060) > > > > Note: Same / similar values worked for us in all-in-one clearwater > deployment. > > > > Thanks and Regards, > > Shree Duth Awasthi. > > > > > > On Thu, Apr 9, 2015 at 1:00 AM, SHREE DUTH Awasthi < > [email protected]> wrote: > > Hi Elle, > > > > Thanks a lot for your time and response. > > > > We are using the Bono IP 10.90.10.104 as home_domain in file > /etc/clearwater/config in all the VMs on ESX Hypervisor. when registering > an account using Zoiper / Xlite, the domain is set as "example.com" > Please let us know, if this is incorrect. > > > > We sometimes get SIP error 408 (request timeout) or 403 (Forbidden). > > > > Other values in Zoiper: > > Account Type : SIP > > user / user@host : 2010000187 (As displayed in Ellis UI) > > password:cVf5DpkTq (As displayed in Ellis UI) > > Domain / Outbound Proxy : example.com > > Account name: [email protected] > > Skip Auto detection : enabled > > Username: 2010000187 > > Password: > > Caller ID Name: [email protected] > > Outbound Proxy: 10.90.10.104:5060 (<Bono-IP>:5060) > > > > > > Interesting logs below. Complete sprout and chronous logs attached. > > > > Homer: > > Traceback (most recent call last): > > Failure: twisted.internet.error.ConnectionRefusedError: Connection was r > efused by other side: 111: Connection refused. > > > > Bono: > > 08-04-2015 18:12:38.813 UTC Call-Disconnected: > CALL_ID=M2E1MGJlZTMyM2Y4ODJkOTBlMjhmODIwMDFiYTgzNGE. REASON=403 > > > > > > Sprout logs: > > SIP/2.0 200 OK > > Via: SIP/2.0/TCP 10.90.10.235;rport=39631;received=10.90.10.235;branch=z9 > > hG4bK-27391 > > Call-ID: poll-sip-27391 > > From: "poll-sip" <sip:[email protected]>;tag=27391 > > To: <sip:[email protected]>;tag=z9hG4bK-27391 > > CSeq: 27391 OPTIONS > > Content-Length: 0 > > > > > > --end msg-- > > 08-04-2015 19:05:58.221 UTC Debug pjsip: tdta0x7f58382b Destroying txdata > > Response msg 200/OPTIONS/cseq=27391 (tdta0x7f58382bb110) > > 08-04-2015 19:05:58.221 UTC Debug thread_dispatcher.cpp:176: Worker threa > d > completed processing message 0x7f57f8013b18 > > 08-04-2015 19:05:58.221 UTC Debug thread_dispatcher.cpp:182: Request late > ncy = > 325us > > 08-04-2015 19:05:58.231 UTC Verbose httpstack.cpp:262: Process request fo > r URL > /ping, args (null) > > 08-04-2015 19:05:58.231 UTC Verbose httpstack.cpp:69: Sending response 20 > 0 to > request for URL /ping, args (null) > > 08-04-2015 19:05:59.227 UTC Verbose pjsip: tcps0x7f57f80c TCP connection > closed > > 08-04-2015 19:05:59.228 UTC Debug connection_tracker.cpp:91: Connection > 0x7f57f80cab08 has been destroyed > > 08-04-2015 19:05:59.228 UTC Verbose pjsip: tcps0x7f57f80c TCP transport > destroyed with reason 70016: End of file (PJ_EEOF) > > > > Ralf logs: > > > > rt=UDP", > > "Time-Stamps": { > > "SIP-Request-Timestamp": 1428520095, > > "SIP-Request-Timestamp-Fraction": 447, > > "SIP-Response-Timestamp": 1428520095, > > "SIP-Response-Timestamp-Fraction": 459 > > }, > > "IMS-Charging-Identifier": "", > > "Cause-Code": 403, > > "From-Address": "\"2010000187\" <sip:2010000187@exa > > mple.com>;tag=684dbf26", > > "IMS-Visited-Network-Identifier": "10.90.10.104", > > "Route-Header-Received": "<sip:10.90.10.235:5054;tr > > ansport=TCP;lr;orig>" > > } > > } > > } > > } > > 08-04-2015 19:08:15.464 UTC Error handlers.cpp:222: JSON lacked a ' > ccf' > array, or the array was empty (mandatory for START/EVENT) > > 08-04-2015 19:08:15.464 UTC Verbose httpstack.cpp:68: Sending respo > nse > 400 to request for URL /call-id/NmQ5ZDQ1MGI5MTNkZWVjYTk5ZDc1YjI > > 0YjQ2N2QwMzk., args {"peers":{},"event":{"Accounting-Record-Type":1 > > ,"Event-Timestamp":1428520095,"Service-Information":{"Subscription- > > Id":[{"Subscription-Id-Type":2,"Subscription-Id-Data":"sip:20100001 > > [email protected]"}],"IMS-Information":{"Event-Type":{"SIP-Method":"RE > > GISTER","Expires":3600},"Role-Of-Node":0,"Node-Functionality":0,"Us > > er-Session-Id":"NmQ5ZDQ1MGI5MTNkZWVjYTk5ZDc1YjI0YjQ2N2QwMzk.","Call > > ed-Party-Address":"sip:[email protected]","Requested-Party-Add > > ress":"sip:example.com;transport=UDP","Time-Stamps":{"SIP-Request-T > > imestamp":1428520095,"SIP-Request-Timestamp-Fraction":447,"SIP-Resp > > onse-Timestamp":1428520095,"SIP-Response-Timestamp-Fraction":459}," > > IMS-Charging-Identifier":"","Cause-Code":403,"From-Address":"\"2010 > > 000187\" <sip:[email protected]>;tag=684dbf26","IMS-Visited-Ne > > twork-Identifier":"10.90.10.104","Route-Header-Received":"<sip:10.9 > > 0.10.235:5054;transport=TCP;lr;orig>"}}}} > > 08-04-2015 19:08:19.619 UTC Verbose httpstack.cpp:259: Process request for > URL /ping, args (null) > > 08-04-2 > > > > > > Thanks and Regards, > > Shree Duth Awasthi. > > +91 8867713871 > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 9, 2015 at 12:02 AM, Eleanor Merry < > [email protected]> wrote: > > Hi, > > There weren't any INVITE attempts in the attached Sprout logs. However, > looking at the Zoiper screenshot, it looks like the Zoiper client isn't > registering (and so won't be able to be part of a call). > In Zoiper, you should set the domain to be the same value as the > home_domain value in /etc/clearwater/config. Your auth username should be > the private identity of your subscriber (which I'd expect to be > <username>@<domain>). > > If this doesn't work, please can you send me the debug logs from Sprout > for a REGISTER attempt? > > Ellie > ------------------------------ > > *From:* SHREE DUTH Awasthi [[email protected]] > *Sent:* 02 April 2015 22:23 > *To:* Eleanor Merry > *Cc:* [email protected] > > > *Subject:* Re: [Clearwater] Multi VM setup -SIP error 408 > > > > Hi Elle, > > > > Thanks a lot for your time and suggestions. > > > > Yes, we have created the file "/etc/clearwater/user_settings" as suggested > and stopped the sprout service. Yes, we may have to ignore the CDF errors > as of now. .PFA for the setting used for calling and requested logs. > Please suggest if any changes are required. > > > > Best Regards, > > Shree Duth Awasthi. > > > > Noticable Sprout logs: > > > > SIP/2.0 200 OK > > Via: SIP/2.0/TCP > 127.0.0.1;rport=45687;received=127.0.0.1;branch=z9hG4bK-34765 > > Call-ID: poll-sip-34765 > > From: "poll-sip" <sip:[email protected]>;tag=34765 > > To: <sip:[email protected]>;tag=z9hG4bK-34765 > > CSeq: 34765 OPTIONS > > Content-Length: 0 > > > > > > --end msg-- > > 02-04-2015 21:20:33.429 UTC Debug pjsip: tdta0x7f10dc00 Destroying txdata > Response msg 200/OPTIONS/cseq=34765 (tdta0x7f10dc00ee40) > > 02-04-2015 21:20:33.429 UTC Debug thread_dispatcher.cpp:176: Worker thread > completed processing message 0x7f10d400c4a8 > > 02-04-2015 21:20:33.429 UTC Debug thread_dispatcher.cpp:182: Request > latency = 494us > > 02-04-2015 21:20:33.430 UTC Debug statistic.cpp:103: Send new value for > statistic latency_us, size 5 > > 02-04-2015 21:20:33.430 UTC Debug zmq_lvc.cpp:172: Update to latency_us > statistic > > 02-04-2015 21:20:33.430 UTC Debug zmq_lvc.cpp:256: Clearing message cache > for 0x7f110c012ff0 > > 02-04-2015 21:20:33.440 UTC Verbose httpstack.cpp:262: Process request for > URL /ping, args (null) > > 02-04-2015 21:20:33.440 UTC Verbose httpstack.cpp:69: Sending response 200 > to request for URL /ping, args (null) > > 02-04-2015 21:20:34.438 UTC Verbose pjsip: tcps0x7f10d400 TCP connection > closed > > 02-04-2015 21:20:34.438 UTC Debug connection_tracker.cpp:91: Connection > 0x7f10d4007f38 has been destroyed > > 02-04-2015 21:20:34.438 UTC Verbose pjsip: tcps0x7f10d400 TCP transport > destroyed with reason 70016: End of file (PJ_EEOF) > > ^C > > > > > > On Thu, Apr 2, 2015 at 9:44 AM, Eleanor Merry < > [email protected]> wrote: > > Hi Shree, > > Can you please turn on debug logging for Sprout, retry the call, and then > send me the debug logs? You can turn on debug logging by creating/editing > the file '/etc/clearwater/user_settings' on the Sprout node, add > log_level=5, and then restart Sprout (run 'service sprout stop' and allow > Sprout to be restarted by monit). > > In the logs you sent before, there are some errors where Sprout is > attempting to send an ACR to Ralf and this is failing. This can happen if > Ralf is unable to send the ACR on to a CDF. If you don't have a CDF (not > provided by Project Clearwater) in your system then you don't need to have > a Ralf in your Clearwater deployment. > > There are also errors where Sprout can't send timer requests to Chronos. > Can you also send me the Chronos logs (in /var/log/chronos/)? > > Ellie > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of SHREE DUTH > Awasthi > Sent: 01 April 2015 21:44 > To: [email protected] > Subject: Re: [Clearwater] Multi VM setup -SIP error 408 > > Hi All, > > Request your time and suggestions. Another important observation on Sprout > VM: > > [sprout]sprout1@sprout1:/var/log/sprout$ sudo netstat -anp | grep 7253 > tcp 0 0 127.0.0.1:7253 0.0.0.0:* LISTEN > 1284/chronos > tcp 0 0 255.255.255.255:7253 0.0.0.0:* LISTEN > 1284/chronos > tcp 0 0 127.0.0.1:37680 127.0.0.1:7253 > TIME_WAIT - > tcp 0 0 127.0.0.1:37819 127.0.0.1:7253 > TIME_WAIT - > tcp 0 0 127.0.0.1:37271 127.0.0.1:7253 > TIME_WAIT - > tcp 0 0 127.0.0.1:37548 127.0.0.1:7253 > TIME_WAIT - > tcp 0 0 127.0.0.1:37137 127.0.0.1:7253 > TIME_WAIT - > tcp 0 0 127.0.0.1:37406 127.0.0.1:7253 > TIME_WAIT - > [sprout]sprout1@sprout1:/var/log/sprout$ > > > [sprout]sprout1@sprout1:/var/log/sprout$ nmap -sT -O localhost TCP/IP > fingerprinting (for OS scan) requires root privileges. > QUITTING! > [sprout]sprout1@sprout1:/var/log/sprout$ sudo nmap -sT -O localhost > > Starting Nmap 5.21 ( http://nmap.org ) at 2015-04-01 20:39 UTC Nmap scan > report for localhost (127.0.0.1) Host is up (0.000044s latency). > Not shown: 998 closed ports > PORT STATE SERVICE > 22/tcp open ssh > 53/tcp open domain > No exact OS matches for host (If you know what OS is running on it, see > http://nmap.org/submit/ ). > TCP/IP fingerprint: > OS:SCAN(V=5.21%D=4/1%OT=22%CT=1%CU=37313%PV=N%DS=0%DC=L%G=Y%TM=551C5782%P=x > OS:86_64-unknown-linux-gnu)SEQ(SP=106%GCD=1%ISR=10A%TI=Z%CI=I%II=I%TS=8)SEQ > OS:(SP=106%GCD=2%ISR=10A%TI=Z%CI=I%II=I%TS=8)OPS(O1=MFFD7ST11NW9%O2=MFFD7ST > OS:11NW9%O3=MFFD7NNT11NW9%O4=MFFD7ST11NW9%O5=MFFD7ST11NW9%O6=MFFD7ST11)WIN( > OS:W1=AAAA%W2=AAAA%W3=AAAA%W4=AAAA%W5=AAAA%W6=AAAA)ECN(R=Y%DF=Y%T=40%W=AAAA > OS:%O=MFFD7NNSNW9%CC=Y%Q=)T1(R=Y%DF=Y%T=40%S=O%A=S+%F=AS%RD=0%Q=)T2(R=N)T3( > OS:R=N)T4(R=Y%DF=Y%T=40%W=0%S=A%A=Z%F=R%O=%RD=0%Q=)T5(R=Y%DF=Y%T=40%W=0%S=Z > OS:%A=S+%F=AR%O=%RD=0%Q=)T6(R=Y%DF=Y%T=40%W=0%S=A%A=Z%F=R%O=%RD=0%Q=)T7(R=Y > OS:%DF=Y%T=40%W=0%S=Z%A=S+%F=AR%O=%RD=0%Q=)U1(R=Y%DF=N%T=40%IPL=164%UN=0%RI > OS:PL=G%RID=G%RIPCK=G%RUCK=G%RUD=G)IE(R=Y%DFI=N%T=40%CD=S) > > Network Distance: 0 hops > > OS detection performed. Please report any incorrect results at > http://nmap.org/submit/ . > Nmap done: 1 IP address (1 host up) scanned in 11.93 seconds > > > Br, > Shree > > On Wed, Apr 1, 2015 at 1:26 PM, SHREE DUTH Awasthi < > [email protected]> wrote: > > > Hello All, > > > > Am sorry for large attachments. > > > > We have successfully installed clearwater multi VM setup with all > > services running in six different VMs which are on ESX hyper visor > > which inturn is on HP proliant BL Gen8 server. > > > > We tried using Zoiper / X-lite client to test the SIP call but the > > call is not going through. Can you please help us with pointers ? > > > > Notifiable Sprout logs: > > 01-04-2015 18:43:44.370 UTC Error httpconnection.cpp:624: > > http://10.90.10.235:7253/timers failed at server 10.90.10.235 : > > Couldn't connect to server (7) : fatal > > 01-04-2015 18:43:44.370 UTC Error httpconnection.cpp:624: > > http://10.90.10.235:7253/timers failed at server 10.90.10.235 : > > Couldn't connect to server (7) : fatal > > 01-04-2015 18:43:44.371 UTC Error httpconnection.cpp:738: cURL failure > > with cURL error code 7 (see man 3 libcurl-errors) and HTTP error code > > 404 > > 01-04-2015 18:43:44.377 UTC Error httpconnection.cpp:738: cURL failure > > with cURL error code 0 (see man 3 libcurl-errors) and HTTP error code > > 400 > > 01-04-2015 18:43:44.377 UTC Warning acr.cpp:627: Failed to send Ralf > > ACR message (0x7f8594007480), rc = 400 > > > > Please find all the relevant attachemnts. > > > > Note: We have already tried calling with and without outboud proxy ! > > > > Best Regards, > > Shree Duth Awasthi. > > +91 8867713871 > > > > _______________________________________________ > Clearwater mailing list > [email protected] > http://lists.projectclearwater.org/listinfo/clearwater > > > > > > > > >
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
