I made sure I downloaded the correct ISO and burned an actual CD (not a USB stick)
I changed the boot order so that the CD drive is first. I also made doubly sure by selecting the CD drive from the boot menu. I can hear the CD drive starting, but no indications of anything on the screen, but then "Security Boot fail" Acer Aspire E15 E5 774G I am trying to clone the existing 1 TB hybrid drive to a brand new 2 TB hybrid drive. I put the source disk in a USB enclosure and the target in the laptop drive bay. If I do it the other way round, it will most likely not boot afterwards. If I use "legacy" instead of UEFI, the CD boots and Clonezilla Live starts and all seems to work until I get to what would be selecting the source disk. I get an error that there must be at least two hard disks, but only one has been found. It does not show which one, but I think it is the USB enclosure it is not finding as the one in the drive bay shows in the bios screen. The same happens on another laptop (Acer Aspire 7739G) (so again I have to use the USB enclosure for the source) where there is not even any mention of UEFI in the bios menu. The CD boots here very quickly, but again claims it cannot find "at least two harddisks" The bios shows the brand new one in the internal drive bay. Both disks are hybrid drives. The source is one Terabyte and has GPT. The target is 2 TB ie double the size and is brand new. Both laptops are 64-bit. The older one has 8 GB RAM and the newer one twelve. I have not found a way to disable secure boot yet, but why would a normal bios not find "enough" hard disks and why doesn't show which one it has actually found? Adrian Godfrey ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Clonezilla-live mailing list Clonezilla-live@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/clonezilla-live
