RE: Re: (clug-talk) UDMA or DMA Support on my DVD

[Ian Bruseker]

RH 8 doesn't do MP3s out of the box.  Check out http://www.redhat.com/advice/speaks_80mm.html for reasons and links to get the software you need to re-enable it.   Ian -----Original Message----- From: Johnny Stork [mailto:[EMAIL PROTECTED]] Sent: Friday, November 15, 2002 11:21 AM To: [EMAIL PROTECTED] Subject: Re: Re: (clug-talk) UDMA or DMA Support on my DVD Sorry, yes RH 8, Mandrake 9.... Also cant get any of my MP3's to play through XMMS when running through my jukeboxes (Netjuke and Andromeda), worked on all previous RH back to 5 something and also with Mandrake up to current version 9. This one is REALLY an annoyance since I play my 3000+ mp3's all day when working. Please let me know if you get UDMA/DMA working and I will also post if I come across a fix. Ya know if both Mandrake and Redhat combined the best of each I would sure be happy. I am sure other distros have other great features not in either so maybe in time....... > > > -----Original message----- > From: "Trevor Lauder" <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Date: 11/15/2002(Fri) 10:09am > Subject: Re: (clug-talk) UDMA or DMA Support on my DVD > > You mean RH 8 right? Cause if your using RH 9 then you didn't get it from > redhat :) hehe > > Anyways, I've been having the same problem. I can't get UDMA or DMA to work on my > DVD-ROM with RH 8. It works fine with all the 7.x releases. I haven't figured out > yet what is wrong but it's really anonying because I can't play DVDs in redhat 8 > when I could in redhat 7.3 > > Anyone have any ideas? > > Thanks, > > Johnny Stork ([EMAIL PROTECTED]) wrote*: > > > >One of my complaints and annoyances with the last few RH releases is that across > at least three MB's I cant seem to get DMA mode working on some CD's or DVD's, > although the last 3 or more Mandrake releases have consistently worked fine? > > > >Anyway, in both my laptop and main workstation, I have both Mandrake 8 and RH 9, > with similiar message log and hdparm results. I will focus on the workstation right > now but getting DMA working on the laptop would be nice too. I actually boot and > run from 3 SCSI drives, and have the two IDE drives (CD and DVD) on the same 1st > IDE channel. > > > >The MB is a Gigabyte GA-7VRX with VIA chipset vt8233a (rev 00) I beleive. The > message log "seems" to indicate UDMA support and hda and hdb using DMA, but as can > be seen by the hdparm output they are not and wont accept dparm -d1 /dev/hda. I > have also tried butting with ide1=dma and ide2-dma as kernel parameters, but still > no cigar (or smooth DVD playback). > > > > > >Snippet from messages log related to IDE: > > > >Nov 15 07:59:30 Johnny kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 > >Nov 15 07:59:30 Johnny kernel: ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > >Nov 15 07:59:15 Johnny kudzu: succeeded > >Nov 15 07:59:30 Johnny kernel: VP_IDE: IDE controller on PCI bus 00 dev 89 > >Nov 15 07:59:15 Johnny sysctl: net.ipv4.ip_forward = 0 > >Nov 15 07:59:31 Johnny kernel: PCI: Hardcoded IRQ 14 for device 00:11.1 > >Nov 15 07:59:15 Johnny sysctl: net.ipv4.conf.default.rp_filter = 1 > >Nov 15 07:59:31 Johnny kernel: VP_IDE: chipset revision 6 > >Nov 15 07:59:15 Johnny sysctl: kernel.sysrq = 0 > >Nov 15 07:59:31 Johnny kernel: VP_IDE: not 100%% native mode: will probe irqs later > >Nov 15 07:59:15 Johnny sysctl: kernel.core_uses_pid = 1 > >Nov 15 07:59:31 Johnny kernel: ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > >Nov 15 07:59:31 Johnny kernel: VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller > on pci00:11.1 > >Nov 15 07:59:15 Johnny network: Setting network parameters: succeeded > >Nov 15 07:59:31 Johnny kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: > hda:DMA, hdb:DMA > >Nov 15 07:59:31 Johnny kernel: hda: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive > >Nov 15 07:59:16 Johnny network: Bringing up loopback interface: succeeded > >Nov 15 07:59:31 Johnny kernel: hdb: LG DVD-ROM DRD-8080B, ATAPI CD/DVD-ROM drive > >Nov 15 07:59:31 Johnny kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > > > > >[root@johnny root]# hdparm -i /dev/hdb > > > >/dev/hdb: > > > > Model=LG DVD-ROM DRD-8080B, FwRev=1.00, SerialNo=1999/08/17 > > Config={ Fixed Removeable DTR10Mbs nonMagnetic } > > RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 > > BuffType=unknown, BuffSize=0kB, MaxMultSect=0 > > (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 > > IORDY=on/off, tPIO=, tDMA= > > PIO modes: pio0 pio1 pio2 pio3 pio4 > > DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 > > UDMA modes: udma0 udma1 udma2 > > AdvancedPM=no > > Drive conforms to: ATA/ATAPI-4 T13 1153D revision 13: 4 > > > >hdparm -i /dev/hda > > > >[root@johnny root]# hdparm -d1 /dev/hdb > > > >/dev/hdb: > > setting using_dma to 1 (on) > > HDIO_SET_DMA failed: Operation not permitted > > using_dma = 0 (off) > > > > > > > > > > > > > >________________________________ > >Open Enterprise Solutions > >Open Solutions for an Open World > > > >Johnny Stork, BA > >Calgary, AB > >Canada > > > >http://www.openenterprise.ca > >http://www.open-solutions.ca > > > > > > > > -- > Trevor Lauder > > --- Home --- > WWW: http://www.thelauders.net > E-Mail: [EMAIL PROTECTED] > > --- Work --- > LAN Solutions > Manager of Linux Solutions > WWW: http://www.lansolutions.ab.ca > E-Mail: [EMAIL PROTECTED] > > > > ________________________________ Open Enterprise Solutions Open Solutions for an Open World Johnny Stork, BA Calgary, AB Canada http://www.openenterprise.ca http://www.open-solutions.ca