|
Thanks, actually MP3 support does seem to be available right out of the box, XMMS and other players work fine. And, I can launch GNOME and all works fine under RH 8, but ONLY when I try to play my mp3's from my jukebox under KDE, do things fail...probably some setting somewhere for the mime/helper or something under KDE. Cheers > > > -----Original message----- > From: "Ian Bruseker" <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Date: 11/15/2002(Fri) 01:46pm > Subject: RE: Re: (clug-talk) UDMA or DMA Support on my DVD > > RH 8 doesn't do MP3s out of the box. Check out http://www.redhat.com/advice/speaks_80mm.html for reasons and links to get the software you need to re-enable it. > > Ian > -----Original Message----- > From: Johnny Stork [mailto:[EMAIL PROTECTED]] > Sent: Friday, November 15, 2002 11:21 AM > To: [EMAIL PROTECTED] > Subject: Re: Re: (clug-talk) UDMA or DMA Support on my DVD > > > Sorry, yes RH 8, Mandrake 9.... > > > Also cant get any of my MP3's to play through XMMS when running through my jukeboxes (Netjuke and Andromeda), worked on all previous RH back to 5 something and also with Mandrake up to current version 9. This one is REALLY an annoyance since I play my 3000+ mp3's all day when working. > > Please let me know if you get UDMA/DMA working and I will also post if I come across a fix. Ya know if both Mandrake and Redhat combined the best of each I would sure be happy. I am sure other distros have other great features not in either so maybe in time....... > > > > > > > > -----Original message----- > > From: "Trevor Lauder" > > To: [EMAIL PROTECTED] > > Date: 11/15/2002(Fri) 10:09am > > Subject: Re: (clug-talk) UDMA or DMA Support on my DVD > > > > You mean RH 8 right? Cause if your using RH 9 then you didn't get it from > > redhat :) hehe > > > > Anyways, I've been having the same problem. I can't get UDMA or DMA to work on my > > DVD-ROM with RH 8. It works fine with all the 7.x releases. I haven't figured out > > yet what is wrong but it's really anonying because I can't play DVDs in redhat 8 > > when I could in redhat 7.3 > > > > Anyone have any ideas? > > > > Thanks, > > > > Johnny Stork ([EMAIL PROTECTED]) wrote*: > > > > > >One of my complaints and annoyances with the last few RH releases is that across > > at least three MB's I cant seem to get DMA mode working on some CD's or DVD's, > > although the last 3 or more Mandrake releases have consistently worked fine? > > > > > >Anyway, in both my laptop and main workstation, I have both Mandrake 8 and RH 9, > > with similiar message log and hdparm results. I will focus on the workstation right > > now but getting DMA working on the laptop would be nice too. I actually boot and > > run from 3 SCSI drives, and have the two IDE drives (CD and DVD) on the same 1st > > IDE channel. > > > > > >The MB is a Gigabyte GA-7VRX with VIA chipset vt8233a (rev 00) I beleive. The > > message log "seems" to indicate UDMA support and hda and hdb using DMA, but as can > > be seen by the hdparm output they are not and wont accept dparm -d1 /dev/hda. I > > have also tried butting with ide1=dma and ide2-dma as kernel parameters, but still > > no cigar (or smooth DVD playback). > > > > > > > > >Snippet from messages log related to IDE: > > > > > >Nov 15 07:59:30 Johnny kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 > > >Nov 15 07:59:30 Johnny kernel: ide: Assuming 33MHz system bus speed for PIO modes; > > override with idebus=xx > > >Nov 15 07:59:15 Johnny kudzu: succeeded > > >Nov 15 07:59:30 Johnny kernel: VP_IDE: IDE controller on PCI bus 00 dev 89 > > >Nov 15 07:59:15 Johnny sysctl: net.ipv4.ip_forward = 0 > > >Nov 15 07:59:31 Johnny kernel: PCI: Hardcoded IRQ 14 for device 00:11.1 > > >Nov 15 07:59:15 Johnny sysctl: net.ipv4.conf.default.rp_filter = 1 > > >Nov 15 07:59:31 Johnny kernel: VP_IDE: chipset revision 6 > > >Nov 15 07:59:15 Johnny sysctl: kernel.sysrq = 0 > > >Nov 15 07:59:31 Johnny kernel: VP_IDE: not 100%% native mode: will probe irqs later > > >Nov 15 07:59:15 Johnny sysctl: kernel.core_uses_pid = 1 > > >Nov 15 07:59:31 Johnny kernel: ide: Assuming 33MHz system bus speed for PIO modes; > > override with idebus=xx > > >Nov 15 07:59:31 Johnny kernel: VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller > > on pci00:11.1 > > >Nov 15 07:59:15 Johnny network: Setting network parameters: succeeded > > >Nov 15 07:59:31 Johnny kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: > > hda:DMA, hdb:DMA > > >Nov 15 07:59:31 Johnny kernel: hda: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive > > >Nov 15 07:59:16 Johnny network: Bringing up loopback interface: succeeded > > >Nov 15 07:59:31 Johnny kernel: hdb: LG DVD-ROM DRD-8080B, ATAPI CD/DVD-ROM drive > > >Nov 15 07:59:31 Johnny kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > > > > > > > >[root@johnny root]# hdparm -i /dev/hdb > > > > > >/dev/hdb: > > > > > > Model=LG DVD-ROM DRD-8080B, FwRev=1.00, SerialNo=1999/08/17 > > > Config={ Fixed Removeable DTR10Mbs nonMagnetic } > > > RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 > > > BuffType=unknown, BuffSize=0kB, MaxMultSect=0 > > > (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 > > > IORDY=on/off, tPIO=, tDMA= > > > PIO modes: pio0 pio1 pio2 pio3 pio4 > > > DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 > > > UDMA modes: udma0 udma1 udma2 > > > AdvancedPM=no > > > Drive conforms to: ATA/ATAPI-4 T13 1153D revision 13: 4 > > > > > >hdparm -i /dev/hda > > > > > >[root@johnny root]# hdparm -d1 /dev/hdb > > > > > >/dev/hdb: > > > setting using_dma to 1 (on) > > > HDIO_SET_DMA failed: Operation not permitted > > > using_dma = 0 (off) > > > > > > > > > > > > > > > > > > > > >________________________________ > > >Open Enterprise Solutions > > >Open Solutions for an Open World > > > > > >Johnny Stork, BA > > >Calgary, AB > > >Canada > > > > > >http://www.openenterprise.ca > > >http://www.open-solutions.ca > > > > > > > > > > > > > -- > > Trevor Lauder > > > > --- Home --- > > WWW: http://www.thelauders.net > > E-Mail: [EMAIL PROTECTED] > > > > --- Work --- > > LAN Solutions > > Manager of Linux Solutions > > WWW: http://www.lansolutions.ab.ca > > E-Mail: [EMAIL PROTECTED] > > > > > > > > > > > ________________________________ > Open Enterprise Solutions > Open Solutions for an Open World > > Johnny Stork, BA > Calgary, AB > Canada > > http://www.openenterprise.ca > http://www.open-solutions.ca > > ________________________________ Open Enterprise Solutions Open Solutions for an Open World Johnny Stork, BA Calgary, AB Canada http://www.openenterprise.ca http://www.open-solutions.ca |
- Re: (clug-talk) UDMA or DMA Support on my DVD Trevor Lauder
- Re: Re: (clug-talk) UDMA or DMA Support on my DVD Johnny Stork
- Johnny Stork
