Don't know if this helps, but I upgraded my 9.0 to 9.1 on Saturday and ran into the same type of thing. Basically, I just went thru the conflicts and tried to sort them out as best I can...downgrading, deleting, etc. To my knowledge everything is working fine and haven't had anything blow on me yet. Even went through and did an online update and so far so good.
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Shawn > Sent: August 10, 2004 1:27 AM > To: CLUG General > Subject: Re: [clug-talk] Suse 9.1 problems > > > On Tuesday 10 August 2004 00:35, s. keeling wrote: > > 64bit?!? Is your machine 64bit? My guess is you installed the wrong > > iso. I could be wrong. All the time I used SuSE, I used yast1 to > > upgrade packages and it never coughed on me once. > > Thanks. I thought that looked weird myself. However, unless the > ISO's Szimir > was burning for us were 64-bit, I did not install or indicate I > had a 64-bit > box (It's only a Duron 1800 - 1.2Ghz). Any hints there Szimir? > > Other than this one place, I haven't seen anything else yet that > indicates > 64-bit. The system works fine (unless I'm hammering it with file > transfers > and such, then it's a little slow...) > > Shawn > > _______________________________________________ > clug-talk mailing list > [EMAIL PROTECTED] > http://clug.ca/mailman/listinfo/clug-talk_clug.ca > _______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca
