Sounds good. I'm $10,000 in the hole right now (cars are expensive - ugh!), so I can't really afford that. Let me know when your second one gets up and running.
On 9/20/07, Mark Carlson <[EMAIL PROTECTED]> wrote: > > On 9/20/07, Mitchell Brown <[EMAIL PROTECTED]> wrote: > > Mark, what is the cost associated with the boards? > > Depends on the board, but I would estimate that it will cost $200-$250 > per board by the time it gets here, and another $50 or so if you need > a power supply, flash card, serial cable, etc. > > Then, if you want to interface with some hardware, that's probably another > $25+ > > If that's too much and you just want to play with some small hardware, > wait until I do the second workshop with microcontrollers. It will be > well under $100 (probably more like $40-$50 or so for everything,) and > may be just as much or even more fun (but will most likely require > windows... lets call it a PROGSIG workshop...) > > -Mark C. > > _______________________________________________ > clug-talk mailing list > [email protected] > http://clug.ca/mailman/listinfo/clug-talk_clug.ca > Mailing List Guidelines (http://clug.ca/ml_guidelines.php) > **Please remove these lines when replying >
_______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
