Chris, I felt a little ill when I saw those photos of your deck opened up! I cannot believe someone would go through the task of opening a deck and putting back together like that!!! It had to be more work than what doing it properly would have been! Pure ignorance, he knew no better. Could you tell there had been a repair done there?
Beautiful work by the way! Danny ---------- Original Message ---------- From: "Chris Duer" <[email protected]> To: <[email protected]> Subject: Re: Stus-List C&C 34: baby stay deck hardware Date: Fri, 3 Aug 2012 08:29:36 -0400 Hi Bill - That is correct. There's some pictures here, but they aren't very close up. I'll look to see if I have any more close up. http://www.facebook.com/media/set/?set=a.218582014849563.49715.1559709444440 04&type=3#!/media/set/?set=a.218582014849563.49715.155970944444004&type=3 Chris Duer C&C 34 #117 Morning View -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Striegel Sent: Friday, August 03, 2012 7:37 AM To: [email protected] Subject: Stus-List C&C 34: baby stay deck hardware Is this correct? I need to remount it on the deck. Two block atop each other go forward.moveable car bumper to stern. Line arrangement: tie line to forward eye on car,then around top block,then around thimble on car,then around lower block forward,then line to deck V-cleat? The aft thimble on the car is not used. Correct? Ps: anyone w picture? Bill Striegel Ocean Springs,MS Sent from my iPad _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
