Thanks. If I only had a clamp type volt meter I'd know if is only the bulb! I'll check in the locker first.
On Fri, Apr 12, 2013 at 2:59 PM, Pat Nevitt <[email protected]> wrote: > Joel, > > All the wiring for mine ran through the anchor locker and I fixed mine by > simply redoing the wire connections in the locker. If it's the bulb, I'll > come down there and dangle you over the side by the ankles :). Also, boxes > work great but have straight edges. Try using a fanny pack or a small > backpack where you can get the lip of the bag up over the deck edge and > tape it down. > > Pat > > On Fri, Apr 12, 2013 at 2:41 PM, Joel Aronson <[email protected]>wrote: > >> I need to replace the bulb in one of my bow lights. Do I remove the >> acorn nuts on the back or the phillips screws on the front? >> >> Should I tape a box to the rail to catch the screws? >> >> -- >> Joel >> 35/3 >> Annapolis >> 301 541 8551 >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> [email protected] >> >> > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
