True statement. I suggested earlier that if it does not sound when the wire is grounded the problem is elsewhere.
A resistance/continuity check across the sensor will quickly tell if it's faulty. No oil pressure should yield a direct short. Rich > On Oct 30, 2013, at 14:36, Bob Dryer <[email protected]> wrote: > > > Message: 4 > Date: Wed, 30 Oct 2013 10:47:08 -0300 > From: Rich Knowles <[email protected]> > To: "[email protected]" <[email protected]> > Subject: Re: Stus-List I need a little help with a sender. > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > Yes. The sensor connects the wire to ground when there is no oil pressure and > that sounds the buzzer. If the sensor is defective, it will not connect the > wire to ground and the buzzer will not sound. > > So... If you connect the wire to ground, you are doing what the sensor should > do, and the buzzer will sound. If the buzzer does then sound, the sensor is > faulty. > > Rich > > Wait a sec. > > If the buzzer (or a connecting wire) is defective the buzzer will not sound > PERIOD. > > Bob > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
