Please send it to Lavan McDaniel 46 bostick cir Beaufort, SC. 29902
Thanks so much. On 11/21/13, Neil Andersen <neil.eric.ander...@gmail.com> wrote: > Still available? Be very glad to have it. Just let me know the > particulars. > > Neil Andersen > 1982 C&C 32, FoxFire > Worton Creek, MD > > On Thu, Nov 21, 2013 at 9:01 AM, Gary Nylander > <gnylan...@atlanticbb.net>wrote: > >> I have a Datamarine Link 5100 system - appears to be complete. Came from >> my SO's late sister - must have been taken out before they upgraded and >> embarked on a voyage south. >> >> Datamarine 5100 control head, Display unit with digital speed and depth, >> analog wind; DX111 depth, SX 120 speed, wind speed/direction mast top >> unit, >> coax cable, through hull speed and depth sensors.... >> >> Yours for the cost of shipping, I have no need. >> >> Gary Nylander >> Maryland >> >> >> >> ----- Original Message ----- >> *From:* Robert Abbott <robertabb...@eastlink.ca> >> *To:* cnc-list@cnc-list.com >> *Sent:* Wednesday, November 20, 2013 9:13 AM >> *Subject:* Stus-List Muffler >> >> John: >> >> I replaced the SS muffler this past Spring.....don't remember the exact >> measurements put similar to yours. >> >> I replaced it with a Vernalift resin muffler....slightly bigger (2" >> higher) muffler but with the same 2" inlet and 1 1/2" outlet. I will try >> to find my receipt which will have the part # if that helps you. Bottom >> line, Vernalift makes a resin muffler with a 1/1/2" outlet. I didn't >> want >> to get into adding hose adapters as my exhaust hoes was replaced last >> year >> and it is 1 1/2". There are no back pressure issues to worry about with >> the 1 1/2" outlet with these small marine diesel engines. >> >> Bob Abbott >> AZURA >> C&C 32 - 84 >> Halifax, N.S. >> >> >> >> >> >> >> >> >> On 2013/11/20 9:00 AM, John and Maryann Read wrote: >> >> The stainless muffler has finally given up the ghost. It is 6 ¼ round, >> 2 inch side inlet and 1 ½ inch top outlet, 9 inches high and the base is >> 7 >> inches square. Any suggested sources?? Vernalift by Centek Industries >> makes a close copy but the outlet is 2 inch. On a related note, any >> thoughts on why the outlet is smaller than the inlet and does this create >> any backpressure issues?? The engine outlet is 2 inch. On the other >> hand, >> this set up has worked well for 30 years so it can’t be all bad J >> >> TIA >> >> John and Maryann >> >> Legacy III >> >> 1982 C&C 34 >> >> Noank, CT >> >> >> >> _______________________________________________ >> This List is provided by the C&C Photo >> Albumhttp://www.cncphotoalbum.comcnc-l...@cnc-list.com >> >> >> ------------------------------ >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com >> >> > -- “Sailors, with their built in sense of order, service and discipline, should really be running the world.” - Nicholas Monsarrat _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
