Also have an old Nova Kool, do you know how to recharge them? Nate "Sarah Jean" 1980 30-1
On Wed, Jan 22, 2014 at 6:49 PM, Jim Watts <[email protected]> wrote: > Our Nova Kool installation is old, but the compressor is cunningly mounted > on top of the galley drawers up in the coaming. It's probably not the best > location in a warm climate... > > Jim Watts > Paradigm Shift > C&C 35 Mk III > Victoria, BC > > > On 22 January 2014 16:29, Joel Aronson <[email protected]> wrote: > >> Doug, >> >> Did an Isotherm 2501 in my 35/3 last year. Hardest part was running a >> wire from the breaker to the lazarette for the compressor. I made a shelf >> fo the compressor out of plywood and epoxied it, only because I had some >> epoxy laying around. I drilled 2 holes in the back of the icebox for the >> copper lines and used a can of foam from Home Depot to fill them. Attached >> the evaporater with spacers and screws. >> >> Joel >> 35/3 >> The Office >> >> >> On Wednesday, January 22, 2014, Doug Allardyce <[email protected]> >> wrote: >> >>> All, >>> I'm in the process of updating a 1985 C&C 35 MK 3. One of my projects is >>> installing a refrigeration unit. As I'm in the planning phase, I'm >>> looking >>> to hear from anyone who has already done an installation. I would be >>> interested to know what unit was selected, and how it was installed. If >>> anyone has pictures that would be great >>> >>> Doug Allardyce >>> 1985 C&C 35 MK III "Bullet" >>> Detroit >>> ~~~~~~~~_/)~~~_/) ~~~~~~~~ >>> >>> >>> >>> >> >> -- >> Joel >> 301 541 8551 >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> [email protected] >> >> > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
