The U elbow piece is ID threaded and on my setup there is a 2" piece of
standard black pipe threaded into it. Next is a 90 degree elbow then a 3" piece
of pipe. That 3" piece of pipe has been turned down from an OD of 1 .650 to
1.520. This piece is turned about 1.5 inches back. This allows the hose to the
water muffler to slide on easily. Even after 20 years I was able to undo the 2
clamps and slide the assembly off with no trouble. Pictures available.
Gary
---- Jake Brodersen <[email protected]> wrote:
> Looks just like mine.
>
> Jake
>
> -----Original Message-----
> From: CnC-List [mailto:[email protected]] On Behalf Of
> [email protected]
> Sent: Saturday, January 25, 2014 2:11 PM
> To: [email protected]
> Subject: Re: Stus-List Mixing Elbow
>
> is this the mixing elbow everybody has?
> http://www.oldportmarine.com/misc_gm_ym_uelbow_assy.htm
>
>
> Gary
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> [email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
