Go with Collinite cleaner wax, get it at the binnacle, one coat every year if the gel coat is good now that is your best bet
_____ From: CnC-List [mailto:[email protected]] On Behalf Of Dr. Mark Bodnar Sent: April 3, 2014 1:15 PM To: [email protected] Subject: Re: Stus-List Poli-Glow Seems this topic raises some divergent opinions. I'm pretty sure my CS 30 is just original gel coat - so I was planning on starting some type of hull upkeep. The polyglow positives sound really sweet - fast and easy is all good to me! Boat will be hauled every year, so easy to re-do yearly. Certainly don't have any interest in compounding the boat every year. I'm more function than fashion - so as long as the hull is protected I'm not going to sweat to make it look pretty. On the other hand - Turtle Wax is not all that challenging either. >From what I've seen back and forth so far it's unlikely I'll have a definitive answer - but I'm tempted to try to PolyGlow route. Mark --------------------- Dr. Mark Bodnar B.Sc., D.C., FCCOPR(C) Bedford Chiropractic --------------------- There is no cure for birth and death save to enjoy the interval. - George Santayana On 03/04/2014 12:59 AM, Rick Brass wrote: Poly-Glow is essentially acrylic floor wax. If you try to sand without stripping the Poly-Glow first, you end up with the sandpaper gummed up with the acrylic. Nothing wrong wit the chemistry or with the gel coat. Just inexperienced "professionals". I've used Poly-Glow on my 25 since the mid 90s and never have stripped it with the exception of one spot repair where a dirty fender ground dirt/mildew/green junk off a piling into the surface during a nor'easter one winter. Poly-prep is dilute ammonium hydroxide. I used concentrated ammonium hydroxide (Purple Power from Walmart at $3 per gallon), rinsed, cleaned the section of hull, recoated wit Poly-Glow. Good as new in under a day. Annual polish is to wash the hull and rinse well with fresh water, and apply a couple of new coats of Poly-Glow, as someone has already said. Takes a couple of hours. Would be easier if the boat got hauled more often than once every 3 or 4 years. I wish my 38 had never been painted. A shiny hull would be so much easier. Rick Brass Sent from my iPad On Apr 2, 2014, at 14:04, Andy Blanchard <[email protected]> wrote: I don't believe in the quit fix like Poli-Glow, I was a believer at one time until I had to do some repairs on my boat after a collision. It was an insurance job so I was looking at having the repairs done by a professional. When they started to sand down the the damage area the sand- paper was gumming and they didn't understand why. I told them that I used Poli-Glow and they think that it could have been a chemical reaction that caused that or the original gel coat never cure properly. No paint would aver stick on the boat in the condition it was in and it turn out the only next option was to re-gel coat the boat. We have old Antique boats that oxidize with time and one day or another you will need to re-paint your boat. Andy C&C 25-1 _____ From: [email protected] Date: Wed, 2 Apr 2014 11:40:20 -0500 To: [email protected] Subject: Re: Stus-List Poli-Glow Which why I chose to paint Touché with Awlcraft rather than Awlgrip. Awlcraft can be more easily repaired and blended than Awlgrip. Although it can be done, painters that can successfully blend Awlgrip are rare. Dennis C. Touché 35-1 #83 Mandeville, LA Sent from my iPhone On Apr 2, 2014, at 9:10 AM, David Knecht <[email protected]> wrote: What is the it that will deteriorate- the Awlgrip or the Poli-glow. Either way, I am not sure what to do this spring. I can either strip the Poli-glow and use Awlcare or keep using Poli-glow. Added to this is the fact that the Awlgrip got badly scratched/scuffed by an unpadded dock last fall (long story). It appears that with Awlgrip, there is nothing you can do except repaint and I am not ready to add that to my boat budget this year. All of this makes me less than enthused by my first Awlgrip experience. Dave On Apr 2, 2014, at 10:00 AM, dwight <[email protected]> wrote: Because it will deteriorate in time and you will have to do it over. With Awlgrip all you really need to do is wash it down well and then if you want a little more do 1 coat of Awlcare, which is really easy to apply as well should least 20+years at least barring scratches and dings _____ From: CnC-List [mailto:[email protected]] On Behalf Of David Knecht Sent: April 2, 2014 10:57 AM To: CnC CnC discussion list Subject: Re: Stus-List Poli-Glow Not realizing that my new boat had Awlgrip, I put Poli-glow on it last spring before launching. It looked great (as usual) so I have no idea why it is not recommended. Dave David Knecht Aries 1990 C&C 34+ New London, CT <image001.jpg> _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] David Knecht, Ph.D. Professor and Head of Core Microscopy Facility Department of Molecular and Cell Biology U-3125 91 N. Eagleville Rd. University of Connecticut Storrs, CT 06269 860-486-2200 860-486-4331 (fax) David Knecht Aries 1990 C&C 34+ New London, CT <pastedGraphic.tiff> _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
