Start first at the switch. Test for power across the terminals with the button pushed. If no voltage is seen on the 1st push, it is likely the contacts within the switch are dirty. You can sometimes temporarily clean the contacts by multiple pushes of the starter button with the ignition key off. If you have voltage across the button, then check for voltage between the button and the solenoid. Clean the terminals on the wires, button, and solenoid. That you can start on the 2nd button push suggest that the solenoid and fuses are OK.
Ed C&C 34 Briar Patch New Orleans On Tue, Jul 28, 2015 at 10:04 AM, jhnelson via CnC-List < cnc-list@cnc-list.com> wrote: > Do you have power at the panel...if warning lights/buzzer? If not then > could be fuse on back of motor that gives power. Otherwise, possible ground > at the transmission to engine > bolt. Those are two simple but we'll hidden things to check. > > > > Sent from my Samsung device > > > -------- Original message -------- > From: Michael Crombie via CnC-List <cnc-list@cnc-list.com> > Date: 07-28-2015 11:51 (GMT-04:00) > To: cnc-list@cnc-list.com > Cc: mcrom...@bell.blackberry.net > Subject: Stus-List Starter > > I've noticed a few times this season that when i push the start button for > my Yanmar 2GM20F nothing happens. When I push it a second time, the engine > starts right up. > > What is the most efficient way of debugging this problem? Should I start > up at the push button switch or at the solenoid? > > Thanks in advance, > > Mike > Atacama, 33 mkii > Toronto > Sent wirelessly from my BlackBerry device on the Bell network. > Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell. > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
