It's a Lewmar V-2 and I am mounting it on deck, just aft of the anchor locker hatch, where there is just enough room. I did have to cut away my staysail track for two screws. I am mounting it on deck rather than in the locker as I want to be able to use it manually should I lose power. I will be running a rode of 80' of 5/16 chain and 150' of 9/16 nylon 3-strand. The biggest hassle is mounting the roller on the bow. I am buying a stock roller and having a stainless plate in the shape of the stemnhead fitting welded to the bottom; that will be tapped into the stemhead.
Andy C&C 40 Peregrine On Mon, Aug 3, 2015 at 10:32 AM, Richard N. Bush via CnC-List < cnc-list@cnc-list.com> wrote: > Andy, what type/brand etc. of windlass are you going with? also can you > tell us about the mounting location? Thanks > > > Richard > 1985 C&C 37 CB; Ohio River, Mile 584.4 At pool Stage finally... > > > Richard N. Bush > 2950 Breckenridge Lane, Suite Nine > Louisville, Kentucky 40220-1462 > 502-584-7255 > > > -----Original Message----- > From: Andrew Burton via CnC-List <cnc-list@cnc-list.com> > To: cnc-list <cnc-list@cnc-list.com> > Cc: Andrew Burton <a.burton.sai...@gmail.com> > Sent: Mon, Aug 3, 2015 10:20 am > Subject: Re: Stus-List Securing seat locker > > I ask this as I am about to mount my windlass switch and breaker in there, > next to my batteries and charger. The wrong wave could ruin my whole > paycheck! Obviously, not a huge factor with coastal cruising, but if I head > offshore... > > Andy > C&C 40 > Peregrine > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
