Hi Alan,
I am having trouble understanding your description. I assume the
first step with the pattern bit is to cut out the new window and the second
step is to remove the old window. If this is true, then I am concerned
about controlling the router in the second step so as not to damage the
area around the old window. Is your old window recessed as mine is?
Gary
S//V High Maintenance
1990 C&C 37 Plus
~~~~~~~_/)~~~~~~
On Wed, Nov 11, 2015 at 5:57 PM, Alan Bergen via CnC-List <
[email protected]> wrote:
> When I removed my windows, I used a router. Use the new window and double
> sided tape to hold the new window in place. Then use the router with a
> pattern bit to go all around the window. Remove the new window, and use
> the router with a straight bit to remove the rest of the window where it's
> held by the plexus.
>
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
>
_______________________________________________
Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
