Something like this might be what you are looking for:
3” in-line bilge blower DetMar Cat No. 7-5-4; 12 VDC 3.5A; Ignition protected – 6 AMP fuse (http://www.amazon.com/DetMar-7-5-1C-4-Blower-Bilge/dp/B0009TQ2WC or http://www.amazon.com/DetMar-7-5-4C-3-Blower-Bilge/dp/B0000AYG8Y/ref=sr_1_1?ie=UTF8 <http://www.amazon.com/DetMar-7-5-4C-3-Blower-Bilge/dp/B0000AYG8Y/ref=sr_1_1?ie=UTF8&qid=1450901052&sr=8-1&keywords=DetMar-7-5-4C-3-Blower-Bilge> &qid=1450901052&sr=8-1&keywords=DetMar-7-5-4C-3-Blower-Bilge Or : http://www.amazon.ca/Rule-140-Marine-Blower-3-Inch/dp/B000O8AZ8K or http://www.amazon.ca/Rule-240-Marine-Blower-4-Inch/dp/B000O8D0IC Marek From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Wednesday, December 23, 2015 14:53 To: 'cnc-list@cnc-list.com' <cnc-list@cnc-list.com> Cc: Della Barba, Joe <joe.della.ba...@ssa.gov> Subject: Re: Stus-List Proper Blower Installation - 30 mki You need to figure out if your vents are 3 or 4 inches. Buy a blower *designed for ventilating gas fumes* with the correct diameter and some hose. You want the end of hose near the engine as low down as you can get. Joe Coquina
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
