I decided to take a crack at repainting the panels. I removed the breakers and the LED lights which were held on with double-sided tape, sanded down panels and painted them with flat black Krylon. While not perfect, they are a big improvement.
Joel 35/3 On Tuesday, January 12, 2016, Dave via CnC-List <[email protected]> wrote: > Used 3/16 black acrylic, wet sanded with 400 grit to a matte finish. > Looks good. Brother p-touch to label panel, and wires also with special > labels. Labelled and routed all wires and secured with cable ties. > Replaced my analog voltmeter with victonix battery monitor. Fits existing > hole > > Dave > > > Message: 1 > Date: Tue, 12 Jan 2016 19:28:34 -0400 > From: Graham Collins <[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>> > To: [email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');> > Subject: Re: Stus-List Refinish/repaint breaker panels? > Message-ID: <[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');> > > > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hi Joel > I had to replace my AC panel, at some point it had a meter in it which > had died and been torn out, looked bad. And I wanted to fit a VHF > adjacent. So I had 2 rectangles cut and I drilled as required, and > painted with black "hammered finish" spray - looks great. And when I > later replaced the panel above it I could easily paint to match. > > Paneltronics will let you pick the exact labels you want and just buy > them, so you don't end up with labels for "trim tab" and "annoyingly > loud stereo"... > > Graham Collins > > Sent from my iPhone > -- Joel 301 541 8551
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
