Tom,
May I suggest the use of children markers (not crayons). The ones for kids are 
water based and run when exposed to water.  I ran a heavy line all along the 
inside of the hull up near the hull/deck joint and on the mast near the roof of 
the cabin so I could see areas that were leaking. 
Ended up the with my biggest issue was the mast boot.  With a keel stepped mast 
you will always get some water down the inside of the mast, but an old or MIS 
fitting mast boot cal let a lot of water in

Neil Andersen1982 C&C 32
Auburn, NY

                _____________________________
From: Thomas Delaney via CnC-List <[email protected]>
Sent: Sunday, February 12, 2017 10:28 AM
Subject: Stus-List New (old) C&C 35 Mk I - Water Ingress
To:  <[email protected]>
Cc: Thomas Delaney <[email protected]>


Hello listers,

In December I finalized the purchase of my first keelboat, a C&C 35 Mk I, after 
receiving an extremely thorough and detailed list of items to survey from Joe 
Della Barba. Joe, thanks again for your help!

The previous owner of the boat was a local racing legend who ran a marina near 
Glen Island, NY. He had been giving me advice on readying the boat for her new 
life on a mooring after spending the last four decades in a slip adjacent to 
his houseboat. Unfortunately, he passed away last weekend.

One of the questions I had yet to broach was the accumulation of water in the 
bilge. The boat has been on the hard, shrinkwrapped, for three years. I've been 
pumping the bilge dry every two-four weeks, and it seems to be about 2-4 
gallons of water as measured by a big plastic bucket. I'm not sure where the 
water is coming from. Apart from the bilge, water is pooling in the 
forward-most storage compartment under the port settee. My first instinct is to 
have a friend on deck hold the screws on the toerails and stanchion bases while 
I slightly tighten the nuts below deck and see if the water ingress stops. Does 
that make sense? Is there a different, better course of action I should take at 
this time? Does anyone know offhand what size socket I'll need?

Thanks in advance,
Tom

---
Snow Goose
C&C 35 Mk I 
City Island, NY



        
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to