We replaced our traveler with a Garhauer Marine windward sheeting
system. Sent Guido our old track and Garhauer match drilled the new
track to fit the hole pattern that existed. Easy replacement and works
great.
BTW, we also have the same tension gauge in your pictures.
What is your hull number and where are is your home port?
You will find this list a great source of information.
Neil Schiller
1970 Redwing 35, Hull #7
(C&C 35, Mark I)
"Corsair"
While Lake, Michigan
On 4/24/2017 9:58 PM, Jim via CnC-List wrote:
Getting my 'new to me last fall' C&C 35 mk 1 ready for spring launch
and am looking for input on the traveler track width (see pic in
attached dropbox link) and what the purpose is for a tool that I found
on the boat (see pic in attached dropbox link).
From the traveler track picture you can see the tape measure shows 1
3/8" wide (disregard the metric side of the tape, us Canadian's eh!).
I'm looking to upgrade the traveler car, add some end sheaves to allow
easier adjustment, etc but can't find anything for a 1 3/8" wide
traveler track, only 1 1/2". Am I misreading the measurement, or
what? I really don't want to replace the whole thing. Any input welcome!
For the other picture of the tool / alignment tool if anyone can
enlighten me what this is for it would be appreciated. Cheers.
https://www.dropbox.com/sc/y2fsam4l5vrvz7v/AAAzwvyuC7njm3lEGi3xNJ1Sa
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
