My outside teak is natural weathered right now. Teak oil was a complete waste of time on exterior wood and the 2-part “cleaner” does WAY more damage than just leaving it alone.
Joe Della Barba DCSI 410-966-7255 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Wednesday, February 07, 2018 2:19 PM To: CnClist <CnC-List@cnc-list.com> Cc: Dennis C. <capt...@gmail.com> Subject: Re: Stus-List Exterior Teak I used teak oil on the toe rails of my previous boat. I religiously oiled them every few months. After a few months, they looked like crap. On Touche' I use Cetol. Five coats Cetol Marine followed by three coats Cetol Gloss. Then a coat of Cetol gloss twice a year. Over ten years in the Louisiana sun and still looking pretty good. I seen dock neighbors use Bristol, teak oil, Semco, etc. For my money and time, it's Cetol. However, I'd be tempted to look hard at Awlwood. Dennis C. Touche' 35-1 #83 Mandeville, LA On Feb 7, 2018 10:47 AM, "Brien Sadler via CnC-List" <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: My exterior teak is starting to show signs of wear and it's time to refinish it. It looks as though it has been varnished in the past but was wondering if anyone has just used teak oil on their exterior wood. Looking for recommendations. Brien Sadler S/V TAZ C&C 35-3 _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
