Definitely press or tap the pin out. My rigger buddy and I have worked on a couple of MKI's. We used an appropriately sized punch and gently tapped out the roll pins. Here's Harken's directions on removing/replacing roll pins.
http://www.harken.com/uploadedfiles/Product_Support/PDF/4884.pdf Unfortunately, I don't have the diameter of pin to give you. Harken no longer stocks them but they may be able to give you the correct size information. You can them order them from mcmaster.com or another vendor. Be sure to use the correct size. If you use a size that's too small, you risk having a pin work it's way partially out of the extrusion. If your swivel is up, you won't be able to drop it. :) Seen that a couple times. It isn't pretty. Dennis C. Touche' 35-1 #83 Mandeville, LA On Sat, Jun 2, 2018 at 12:06 PM, T power via CnC-List <[email protected] > wrote: > Hi Mike, > > > Thanks for the info and tip on getting them out, I'm definitely going to > try pressing them out. > > > Cheers > > > Tom Power <http://aka.ms/weboutlook> > Invictus > C&C 30 MK1 > Fredericton, NB > ------------------------------ > *From:* CnC-List <[email protected]> on behalf of T power via > CnC-List <[email protected]> > *Sent:* Friday, June 1, 2018 8:44:10 PM > *To:* [email protected] > *Cc:* T power > *Subject:* Stus-List Roll pin size > > > Hi everyone, I need to replace a foil on my elderly harken furler. They > are joined with roll pins, which will need to be drilled out. Anyone have > any idea what size they would be. Thanks for any help > > > Tom Power <http://aka.ms/weboutlook> > Invictus > C&C 30 MK1 > Fredericton, NB > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
