Sand to virgin fiberglass and bare metal then quickly apply epoxy using a 3M ScotchBrite pad. The pad will rub off any oxidation that forms. The epoxy will prevent new oxidation from forming. Then slap on 2 overlapping layers of 4" biaxial tape with epoxy. Sand, fair, paint, go sailing.
Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Jun 4, 2018 at 10:24 PM, Chris Hobson via CnC-List < cnc-list@cnc-list.com> wrote: > Hauled out today for a quick bottom job. Yard suggested fibreglass for the > crack, but then there’s also G-Flex. Epoxy and fairing could be an option > but that would add on to the project. Any success or opinions on one or the > other? It’s a minor smile, no torquing keel bolts at dropping anything. > > Chris > 80’ C&C 30 MK1 > > Sent from my iPhone > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray