The most common deck colour by far was 'Smoke White'. There were a few boats built with 'White' decks, but not many. You had the choice when ordering your boat.
Of the 44 x C&C 37/40 I have records for one was "Neptunus White, three were 'White' and one was 'Pure White'. All the rest, 38 of them, are 'Smoke White'. Oh, and one was 'Cloud Grey'. Different... Ken H. On Sat, 23 Jun 2018 at 11:48, Glenn Henderson via CnC-List < [email protected]> wrote: > I just bought a 1984 C&C 41 sailed it from Rhode Island to Tampa Bay. I > really enjoy sailing this boat. > > It has several gel-cot cracks radiating from the highly loaded hardware. I > am going to try the MagicEzy product to repair these. Assuming C&C used the > same deck gelcoat color on all boats, does anyone know which of the white > colors they offer more closely matches the C&C color? > > Thanks, > > Glenn Henderson > > On Sat, Jun 23, 2018 at 8:15 AM, <[email protected]> wrote: > >> Send CnC-List mailing list submissions to >> [email protected] >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> or, via email, send a message with subject or body 'help' to >> [email protected] >> >> You can reach the person managing the list at >> [email protected] >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of CnC-List digest..." >> >> Today's Topics: >> >> 1. Mast shoe wood shims (Chuck S) >> 2. Re: Mast shoe wood shims (Randy Stafford) >> 3. (no subject) (Skip Hankins) >> 4. Re: Free Sails for C&C 37+ (John Conklin) >> >> >> ---------- Forwarded message ---------- >> From: Chuck S <[email protected]> >> To: "CNC boat owners, cnc-list" <[email protected]> >> Cc: >> Bcc: >> Date: Fri, 22 Jun 2018 16:27:58 -0400 (EDT) >> Subject: Stus-List Mast shoe wood shims >> >> Hi guys, >> >> Two of the eight wooden shims that sit in the aluminum shoe to hold the >> mast foot in position, were rotted, so I fabricated new ones. I chose teak >> because I had some thick scraps that matched. Now I'm wondering if I >> should seal them. >> >> >> I have Cetol, Watco oil, or West system epoxy to choose from. Not sure >> which would be the best. >> >> >> Chuck Scheaffer >> >> Resolute >> 1990 C&C 34R >> Broad Creek, Magothy River, Md >> >> >> ---------- Forwarded message ---------- >> From: Randy Stafford <[email protected]> >> To: [email protected] >> Cc: >> Bcc: >> Date: Fri, 22 Jun 2018 14:53:31 -0600 >> Subject: Re: Stus-List Mast shoe wood shims >> I did the same thing this offseason Chuck - fabricated a half-dozen >> 4&3/4” x 1&3/4" x 1/4" teak shims to sit on edge in the mast box so I could >> fine-tune the fore-and-aft position of my mast base (and I think I’ve got >> it 1/4” too far aft this season). Since I had Cetol Marine Natural Teak >> and Gloss on hand from other brightwork projects, I just went ahead and >> finished my shims with that. >> >> Cheers, >> Randy Stafford >> S/V Grenadine >> C&C 30-1 #7 >> Ken Caryl, CO >> >> On Jun 22, 2018, at 2:27 PM, Chuck S via CnC-List <[email protected]> >> wrote: >> >> Hi guys, >> >> Two of the eight wooden shims that sit in the aluminum shoe to hold the >> mast foot in position, were rotted, so I fabricated new ones. I chose teak >> because I had some thick scraps that matched. Now I'm wondering if I >> should seal them. >> >> >> I have Cetol, Watco oil, or West system epoxy to choose from. Not sure >> which would be the best. >> >> >> Chuck Scheaffer >> >> Resolute >> 1990 C&C 34R >> Broad Creek, Magothy River, Md >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> >> >> >> ---------- Forwarded message ---------- >> From: Skip Hankins <[email protected]> >> To: C C List <[email protected]>, curtis 9860601 < >> [email protected]>, denise pitts < >> [email protected]>, David Maxwell < >> [email protected]>, Eddie Gayheart <[email protected]> >> Cc: >> Bcc: >> Date: Sat, 23 Jun 2018 02:30:36 -0400 >> Subject: Stus-List (no subject) >> >> http://kind.sweatequityjobs.net >> >> Skip Hankins >> >> >> ---------- Forwarded message ---------- >> From: John Conklin <[email protected]> >> To: "[email protected]" <[email protected]> >> Cc: >> Bcc: >> Date: Sat, 23 Jun 2018 14:14:19 +0000 >> Subject: Re: Stus-List Free Sails for C&C 37+ >> I will be doing some measuring too next weekend on my standard 37 >> >> Sent from my iPhone >> >> On Jun 22, 2018, at 12:19 PM, Bruce Whitmore via CnC-List < >> [email protected]> wrote: >> >> Hi Josh, >> >> I think I may be interested, but will need to get to the boat to do some >> measuring over the weekend. >> >> Will let you know shortly, >> >> Bruce Whitmore >> >> (847) 404-5092 (mobile) >> [email protected] >> >> >> ------------------------------ >> *From:* Josh Muckley via CnC-List <[email protected]> >> *To:* C&C List <[email protected]> >> *Cc:* Josh Muckley <[email protected]> >> *Sent:* Friday, June 22, 2018 9:49 AM >> *Subject:* Re: Stus-List Free Sails for C&C 37+ >> >> I got a chance to go through the sails that Bacon claimed to be >> "delaminating" and "of no value". I'm not a professional sail maker (or >> sailor for that matter) but both sails looked to be in perfectly fine >> condition. They might be equivalent to a 2 or 3 year old race sail. No >> delamination anywhere. As Ron described one is a 98% and the other is a >> 155%. The 98% has partial battens. The 155% is radial cut. Both are a >> mylar/kevlar material and very light by comparison to my 7.5 oz cloth >> %145. The sail bags appear to be in worse condition than the sails. I'll >> be holding the sails until Ron picks them up in October. If anybody is >> interested between now and then, just let me or Ron know. >> >> Josh Muckley >> S/V Sea Hawk >> 1989 C&C 37+ >> Solomons, MD >> >> On Wed, Jun 20, 2018, 12:17 PM Josh Muckley <[email protected]> wrote: >> >> For anyone else considering these sails, feel free to reach out to me. >> I've agree to hold on to them for Ron but will likely never use them. I >> have the triple spreader rig and have had a new sail made for my boat. >> It's luff length is 51' 2.5". I had it cut slightly short so that it would >> ride slightly above the deck and lifelines. Thus, Ron's sails measuring at >> 51' 5" would mate with my furler just fine. I believe that the second sail >> with a 52' luff would need to be flown without the furler drum or swivel >> (or both). >> >> Josh Muckley >> S/V Sea Hawk >> 1989 C&C 37+ >> Solomons, MD >> >> >> >> >> On Tue, Jun 19, 2018, 1:50 PM Ron Ricci via CnC-List < >> [email protected]> wrote: >> >> I have two jibs that I don’t use and will give them to anyone willing to >> pick them up in Annapolis, MD. Below are links to photos and specs for >> each sail. >> · 98% Kevlar Jib - https://1drv.ms/f/s!AhpB-lul9d5YrkeG82Ht0IpjLOc5 >> <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2F1drv.ms%2Ff%2Fs!AhpB-lul9d5YrkeG82Ht0IpjLOc5&data=02%7C01%7C%7C62a7492537b6409a3a2708d5d85c0be7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636652812196941400&sdata=KbcNyihZU5i8qtLF7Oi3W8i2But8NnKzIYPdyNxYOBo%3D&reserved=0> >> o Luff = 51'-5" >> o Foot = 15'-8" >> o Leach = 49' >> · 155% Light Kevlar Genoa - >> https://1drv.ms/f/s!AhpB-lul9d5YrkZsSamLMQtUGi1y >> <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2F1drv.ms%2Ff%2Fs!AhpB-lul9d5YrkZsSamLMQtUGi1y&data=02%7C01%7C%7C62a7492537b6409a3a2708d5d85c0be7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636652812196941400&sdata=iwrqfgg6Th%2F5Jy2Onb1KsHbKOWHrk%2BUBWidQNFRjvU0%3D&reserved=0> >> o Luff = 52' >> o Foot = 24'-9" >> o Leach = 50'-6" >> I took these sails to Bacon Sails last March and after several inquiries >> they finally said the sails had no value because supposedly they were >> de-laminating. When I left the sails off, the preliminary inspection did >> not show any delamination nor did I see any when the photos were taken. It >> is not practical for me to pick up the sails and it would be a shame to >> dispose of them. I’d feel much better if someone could put them to good >> use (or at least store them in their attic). >> Please contact me off line ASAP if you are interested. I will make >> arrangements so you can pick up one or both. >> Thanks, >> *Ron* >> Ron Ricci >> S/V Patriot >> C&C 37+ >> Bristol, RI >> [email protected] >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7C%7C62a7492537b6409a3a2708d5d85c0be7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636652812196941400&sdata=HTr5bj6fGcAXwGXsn7KX7joubAeu0oVc1M%2FhtfoT6Xk%3D&reserved=0> >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7C%7C62a7492537b6409a3a2708d5d85c0be7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636652812196941400&sdata=HTr5bj6fGcAXwGXsn7KX7joubAeu0oVc1M%2FhtfoT6Xk%3D&reserved=0> >> >> >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- >> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7C%7C62a7492537b6409a3a2708d5d85c0be7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636652812196941400&sdata=HTr5bj6fGcAXwGXsn7KX7joubAeu0oVc1M%2FhtfoT6Xk%3D&reserved=0 >> >> >> _______________________________________________ >> CnC-List mailing list >> [email protected] >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
