For our old Redwing 35 (C&C 35-1), I had 300 Series Stainless backing
plates made to replace the mild steel backing plates on her when we
bought it. I wish I could tell you how much they cost, but a friend
that owns an aerospace machine company made them out of a scrap piece of
stainless he had. I had asked him to give me a quote to make them. I
still have one left over and could measure it if you need.
Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC
On 1/15/2019 9:57 AM, Dan via CnC-List wrote:
Hi All, I know this has been discussed many times here but this is a
quick and simple one.
I'm going to be torquing my keel bolts this spring and I've noticed
that the washers/spacers under some of the nuts are coroding and need
to be replaced. I'd like to change them out for Stainless Steel.
What do you guys have for keel bolt washers/spacers and how did you
get them made?
Thanks!
Dan
Breakaweigh
C&C44
Halifax, NS
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
