Thanks Everyone, I think I've got enough info to get it done. I have to measure things and make decisions. I'm definitely going with a bedded backing plate, and washer. Kind of excited to get the bilge cleaned up to the level that it can take epoxy :)
Dan On Tue, Jan 15, 2019 at 1:25 PM schiller via CnC-List <[email protected]> wrote: > For our old Redwing 35 (C&C 35-1), I had 300 Series Stainless backing > plates made to replace the mild steel backing plates on her when we bought > it. I wish I could tell you how much they cost, but a friend that owns an > aerospace machine company made them out of a scrap piece of stainless he > had. I had asked him to give me a quote to make them. I still have one > left over and could measure it if you need. > > Neil Schiller > 1983 C&C 35-3, #028, "Grace" > Whitehall, Michigan > WLYC > > On 1/15/2019 9:57 AM, Dan via CnC-List wrote: > > Hi All, I know this has been discussed many times here but this is a > quick and simple one. > > I'm going to be torquing my keel bolts this spring and I've noticed that > the washers/spacers under some of the nuts are coroding and need to be > replaced. I'd like to change them out for Stainless Steel. > > What do you guys have for keel bolt washers/spacers and how did you get > them made? > > Thanks! > > Dan > Breakaweigh > C&C44 > Halifax, NS > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
