On Persistence we went with new teak and holly. Thankfully one sheet did entire job because was well over 600 CAD at the time. West epoxy on bottom and sides using special hardener (the one for wood). Top three coats west epoxy followed by four costs epiphanes satin varnish. Extremely important to use the proper hardener so that you do not see flow arks of the epoxy
Mike Persistence Halifax From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Dave Godwin via CnC-List Sent: November 9, 2019 10:15 AM To: cnc-list@cnc-list.com Cc: Dave Godwin <dave.god...@me.com> Subject: Re: Stus-List Cabin Sole resurfacing Bruce, I used Awlgrip’s Awlwood MA Gloss and Primer on the teak and holly surface. Finished off with a regular satin finish varnish. I used West System epoxy to seal the rest of the surfaces. http://roninrebuild.blogspot.com/search?updated-max=2015-03-16T14:37:00-07:00&max-results=7&start=13&by-date=false Regards, Dave Sent from my iPad On Nov 9, 2019, at 08:53, bwhitmore via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I'm looking at replacing ours as well, though probably sometime next year. What is the preferred method of sealing and varnishing the wood? What varnish did you use? Did you seal the underside with epoxy? If so, what kind? Bruce Whitmore 1994 C&C 37/40+ "Astralis" Sent from Samsung tablet. _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray