It is a tapered key. Sent from my iPhone
On Apr 7, 2020, at 6:22 PM, John Conklin via CnC-List <cnc-list@cnc-list.com> wrote: Hi, Silly question here but doing some Maintenance on the crunchy AutoHelm ST4000, and plenty of you tube on fixing that belt /drive.. I have an esdon Pedestal with the control levers (up , Down) on each side which appear original for sure. BUT the Silly Edson Wheel! after nut removal, wheel slides out (snug but easily) to a certain point just past spokes, and sticks there? Almost like its tapered? You can see in picture here the Keyway ? https://www.dropbox.com/s/ust0nvmoxir3yh2/wheel2.jpg?dl=0 Does this key need to be removed/loosened. Its not loose at all. Or do I need to just put little more lube and little more elbow grease? I don’t want to damage threads , or wheel for sure! Need to fix this for some Solo sailing on Halcyon this week, at least that’s my excuse. We are allowed to sail and I intend to do so,with or without Auto Pilot. However, Otto driving into the wind would be nice, as it was blowing 25+ yesterday ! 😊 Thanks! John Conklin _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray