I've had good luck with a hand impact driver. Just be sure you hold it tight to the screw head while you whack it or you'll mess up the screw head.
Used to work on motorcycles a lot. Hand impact driver was my best friend. Dennis C. On Mon, Jun 1, 2020 at 8:21 PM Robert Abbott via CnC-List < [email protected]> wrote: > I want to remove a stanchion but the SS screw in the toe rail into the > stanchion is seized .....I have applied PB Blaster, 50% ATF - 50% > Acetone....tied putting a Philips head driver and hammering it to break > the bond, no luck. > > Scared to try torch heat because of the proximity to the hull and do not > have an impact driver but may get one. > > Anyone have any experience with this? > > > > Rob Abbott > > AZURA > > C&C 32 - #277 > > Halifax, N.S. > > > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Dennis C. Touche' 35-1 #83 Mandeville, LA
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
