Nice windows I’ll have to do mine too Mine has been on the hard 6 - 7 years un protected Is it hard to do fibreglass and gelcoat Or can I just sand the old gel coat and reapply new one It for the whole top deck and some part on the hull
On Mon, Jun 8, 2020 at 12:05 AM Derek McLeod via CnC-List < cnc-list@cnc-list.com> wrote: > My window project snowballed into a similar paint the topsides and deck > after some of the Plexus came out in big chunks. Those chunks needed to be > filled which needed paint over top which looked way better than the old > paint and so it started... > > Derek McLeod > Aileron, 1983 C&C 29-2 > Toronto > > On Jun 7, 2020, at 9:34 PM, CHARLES SCHEAFFER <cscheaf...@comcast.net> > wrote: > > Your portlights look great. I've been working on mine and today finally > removed all the old Plexus using a combination of heat gun and chisel and > angle grinder with flap disc where the stuff was very thick. Spent most of > the day on it. Hope my new ones look as good. Have to wait till after I > finish patching, fairing and painting. I'm painting my deck to upgrade the > non-skid which is mostly worn smooth. > > Chuck Scheaffer, Resolute 1989 C&C 34R, Pasadena Md > > On June 7, 2020 at 6:37 PM Peter Cowenhoven via CnC-List < > cnc-list@cnc-list.com> wrote: > > New portlight windows. Finally got them installed! Not perfect but huge, > huge improvement. > Locally cut acryllic grey 2064 tint, VHB tape, Dow Corning 795. Worked > great. > https://photos.app.goo.gl/WYCCczEPXAoEni186 > Peter C. > 84 Landfall 35 > Westbrook, CT > > Sent from Yahoo Mail on Android > <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> > > On Tue, Jun 2, 2020 at 11:01 AM, Steve Franks via CnC-List > <cnc-list@cnc-list.com> wrote: > Hey everyone > I’m in the processing of purchasing a 1987 35 mkiii. It’ll be my second > boat and plan to get it up to snuff for sea of Cortez later this year. > On my short list is replacing the port light windows on both sides. Trying > to see if anyone has a resource for replacements or a file I could shop > around with to have new ones cut. Appreciate your help in advance. By the > way I got a quote from leaky windows and they wanted 2k for the kit so > that’s what I’m working with so far. > Best > Steve > -- > Steve Franks > 949.370.4563 > www.stevefranks.work > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Joel Delamirande *www.jdroofing.ca <http://www.jdroofing.ca>*
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
