Grind the nut off inside the boat? I've got a Foredom brand tool with a
flex shaft that you can borrow if you need it, blows the dremel away -
but a dremel would work also.
Graham Collins
Secret Plans
C&C 35-III #11
On 2020-07-01 12:28 p.m., Michael Brannon via CnC-List wrote:
Left handed drill bits work well on this type of problem.
Mike Brannon
Virginia Lee 93295
1978 C&C 36 CB
Virginia Beach, VA
On Jun 1, 2020, at 9:21 PM, Robert Abbott via CnC-List
<[email protected] <mailto:[email protected]>> wrote:
I want to remove a stanchion but the SS screw in the toe rail into
the stanchion is seized .....I have applied PB Blaster, 50% ATF - 50%
Acetone....tied putting a Philips head driver and hammering it to
break the bond, no luck.
Scared to try torch heat because of the proximity to the hull and do
not have an impact driver but may get one.
Anyone have any experience with this?
Rob Abbott
AZURA
C&C 32 - #277
Halifax, N.S.
_______________________________________________
Thanks everyone for supporting this list with your contributions.
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
