Sitting in the slip... My wifi is connected often enough. I see it as being similar to many of the smart devices in our homes. I can control my grill and my Christmas lights anywhere in the world and I currently monitor my freezer temp remotely. If I lose wifi momentarily or for hours on end it doesn't matter. Once a wifi signal is running again everything picks right up where it left off. Sure I'm SOL during the outage but sitting in the slip or on the hard my wifi is sufficient. If it isn't a wifi Hotspot or cell phone plan isn't very prohibitive.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Tue, Mar 2, 2021, 15:58 Robert Boyer via CnC-List <cnc-list@cnc-list.com> wrote: > All this depends on a reliable WIFI connection, right? Do you think your > bilge pump switch, for example, is more or less reliable than your onboard > WIFI connection? > > Bob > > Bob Boyer > s/v Rainy Days > C&C Landfall 38 (Hull # 230) > (Spending winters in warm places, and summers on the Chesapeake Bay) > blog: dainyrays.blogspot.com > email: dainyr...@icloud.com > > On Mar 2, 2021, at 1:43 PM, Riley Anderson via CnC-List < > cnc-list@cnc-list.com> wrote: > > > Len, I'm installing a Victron Cerbo GX. It can do everything you're asking > and will transmit data remotely to the Victron VRM app/website. It needs an > internet connection. Either wifi or hardwired. Victron also sells a GSM > device with a SIM card (~$12/month) if you don't want to rely on marina > wifi. > > Here is the Victron Cerbo GX: https://amzn.to/2OfIPxc and technical data > <https://www.victronenergy.com/panel-systems-remote-monitoring/cerbo-gx>. > It can do a lot. Just depends on how fancy you want to get. You can email > me if you have more questions. > > You can also build your own with a raspberry pi and the open-source Venus > OS from Victron. It's the same software they use on the Cerbo but you'll > have to be pretty software savvy to make it do everything you want. Here is > a link to the Venus OS GitHub page: > https://github.com/victronenergy/venus/wiki > > Hope this helps, > Cheers > Riley > > On Tue, Mar 2, 2021 at 11:31 AM Len Mitchell via CnC-List < > cnc-list@cnc-list.com> wrote: > >> With all this talk about bilge pumps I am looking at a way to monitor the >> boat when I am not there. Has anyone bought or built a monitor? It looks >> possible with a Raspberry Pi computer. I would like to monitor battery bank >> voltage, bilge pump cycles or bilge water level and refrigerator >> temperature. You could go farther and monitor tank levels or install a cctv >> camera too. I am interested in any experience on this. I am not opposed to >> using an old laptop, iPad or tablet if that is more robust. >> >> >> https://medium.com/initial-state/how-to-monitor-your-boat-during-the-winter-months-d89f7d76a88d >> >> >> Len Mitchell >> >> S/V Crazy Legs >> >> 1989 C&C 37+ >> >> Midland On. >> >> >> Sent from my iPad >> Thanks to all of the subscribers that contributed to the list to help >> with the costs involved. If you want to show your support to the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> Thanks - Stu > > > > -- > Fair winds and following seas, > > Charlotte Freeland & Riley Anderson > SV Freight Train > Middletown, CT USA > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
