I have a 30gal water tank under both settees. The valves for each are set to open flow. However, the pump seems to draw only from the starboard side. I’d assumed that with both valves open, the tanks would equalize, but the stbd tank empties and the pump goes dry, while the port tank remains full. Can someone venture to what’s going on? I’ve read [this 2015 discussion](https://cnc-list.com/empathy/thread/2KB2NSDGELMQQJSRMPPWPHVMCWQJ2ICR?hash=SLQZNGDWP5TUBYWW6HFGKHJT5DVCWB5F#SLQZNGDWP5TUBYWW6HFGKHJT5DVCWB5F), but the OP then was interested in disconnecting the two tanks. I’ll do some exploring tomorrow to see what might be preventing the tanks from equalizing. Ideas are welcome.
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
