As Joel said, cut it out. Start in the middle with an adult human head-sized hole to investigate the sitch. The bulkhead is tabbed to the hull, probably on the aft side under the liner, maybe both sides, though I doubt it.
Question is, why so much moisture… chain locker yes? With no access hatch? How old is Tryfan? Also, I am no expert. I’ve just been cutting out the interior of Inconceivable for the past three weeks. ~Hans SV Inconceivable C&C Corvette 31 Hull #138 > On May 27, 2021, at 5:13 AM, Joel Delamirande via CnC-List > <[email protected]> wrote: > > > I would say cut it out and put a new piece > Or does the Kingston museum for C&C > Have the plans for the boats > >> On Wed, May 26, 2021 at 11:35 PM Andrew Walther via CnC-List >> <[email protected]> wrote: >> Hi there, >> >> >> >> Forward most bulkhead is rotting and I can’t figure out how to remove it. >> >> >> >> Here’s a video… >> >> >> >> https://photos.app.goo.gl/e77DRbCFEQnFiBJ99 >> >> >> >> Any help / suggestions would be most appreciated! >> >> >> >> Thanks! >> >> >> >> Andy >> >> C&C33-2 (Tryfan) >> >> Comox, BC >> >> Thanks to all of the subscribers that contributed to the list to help with >> the costs involved. If you want to show your support to the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >> Stu > -- > Joel Delamirande > > www.jdroofing.ca > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
