Thanks Al, I just confirmed my portlights are also 1/4”. If anyone in the New York area needs some 3/8” let me know!
On Thu, Jun 17, 2021 at 12:31 PM Alan Liles via CnC-List < cnc-list@cnc-list.com> wrote: > I replaced my fixed port lights two years ago. I used 1/4 “extruded > plexiglas with VHB tape and Dow 795. The plexi had enough flex to > accommodate the curve of the cabin and the VHB tape held it in place. The > 795 was used to seal the gap. The installation was the easiest part of that > job. The removal of the old plexi and the repairs to the damaged gel coat > took the most time. The guy who cut my plexi was a bit of a butcher so I > spent a day with a file smoothing out the chatter marks on the edges. In > the end it looked great and, so far, no leaks. > > Cheers, Al > SV Elendil > C&C 37/40+ > Vancouver BC > > > > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
