I’d like to see this too if you have pictures Tom
Sent from my iPhone > On Nov 22, 2021, at 11:46 PM, Richard Bush via CnC-List > <cnc-list@cnc-list.com> wrote: > > > Ron, do you have any photos of your setup? Thanks > > Richard > > Richard N. Bush Law Offices > 2950 Breckenridge Lane, Suite Nine > Louisville, Kentucky 40220-1462 > 502-584-7255 > > > -----Original Message----- > From: RON CASCIATO via CnC-List <cnc-list@cnc-list.com> > To: Stus-List <cnc-list@cnc-list.com> > Cc: RON CASCIATO <rjcasci...@comcast.net> > Sent: Mon, Nov 22, 2021 10:22 pm > Subject: Stus-List Re: Garboard > > Agreed, we did this on Impromptu almost 7-8 years ago. > We drilled the hole a quarter inch below the floor of the bilge...FROM THE > OUTSIDE!!! > I think the diameter of the threaded piece is 1", I took it to Home Depot and > found a male adapter that fit....and pieced a 6" piece of PVC with a 45 > degree angled end.... > Bilge drains dry and no water running down the keel. > The drain unscrews out and the plug sits just under the hull surface.....we > swipe it with a dollop of Bondo and bottom paint. > End of season, we just pick out the 1" circle of Bondo and screw the PVC > drain back in. > An easy DYI project.... > Ron Casciato > Impromptu > C&C 38 MKII..'77 > > On Nov 22, 2021 4:50 PM, WILLIAM WALKER via CnC-List <cnc-list@cnc-list.com> > wrote: > Finally Did this 2 years ago..best thing ever did for the boat. > Look in archives, there is recent thread with good ideas > Bill Walker > > On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List > <cnc-list@cnc-list.com> wrote: > > > > Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking > at leaving my mast up but concerned about water entering the boat through the > mast > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
