Ok fair enough.
I am not sure cobbler is keeping up with linux tbh. For example those kernel
options need to be used with ubuntu 16.04. Maybe there is a future roadmap for
cobbler? Or maybe the future is cloud where you dont need to do os installs?
From: Matt Luettgen <mattluett...@gmail.com>
Cc: cobbler mailing list <firstname.lastname@example.org>
Sent: Fri, 14 Oct 2016 18:14
Subject: Re: [cobbler] Re: teamd support in cobbler
teamd has better speeds, options, etc...
On Oct 14, 2016 12:00 PM, <alast...@alastair-munro.com> wrote:
> Meant to add, this just sounds like bonding mode 5? Is there are reason
> why you don't want to use this? Cobbler supports bonding.
> A quick google finds this (saves me trying to explain it):
> I tend to force the old device naming on el7 (like eth0), as its a bit
> more predictable for cobbler. Use these as kernel options.
> net.ifnames=0 biosdevname=0
> On 2016-10-14 17:50, alast...@alastair-munro.com wrote:
>> Network Manager is managing networking via a service.Originally it was
>> designed for GUI logins where you would login as a user as part of the
>> login, network manager would be run to setup the network (typically
>> using dhcp). Now it seems Network Manager is much more expanded.
>> Refering to the link below, section 1.9 refers back to the static
>> network config, which cobbler implements: 1.9. NETWORK CONFIGURATION
>> USING SYSCONFIG FILES.
>> Note this section:
>> 1.3. INTRODUCTION TO NETWORKMANAGER
>> In Red Hat Enterprise Linux 7, the default networking service is
>> provided by NetworkManager, which is a dynamic network control and
>> configuration daemon that attempts to keep network devices and
>> connections up and active when they are available. The traditional
>> ifcfg type configuration files are still supported. See Section 1.8,
>> “NetworkManager and the Network Scripts” for more information.
>> So I think cobbler uses the older/static way of configuring
>> networking, using the /etc/sysconfig/network-scripts config dir.
>> I am not sure what is planned for future versions of cobbler?
>> I suspect you may need to include post kickstart snippet for using
>> network manager, or figure how to do the teaming using the older
>> On 2016-10-14 16:01, Matt Luettgen wrote:
>>> On Oct 14, 2016 9:39 AM, "Orion Poplawski" <or...@cora.nwra.com>
>>> On 10/14/2016 01:31 AM, johanwint...@gmail.com wrote:
>>>> Will there be teamd support in cobbler? or how can i deploy rhel7
>>>>> machines with teamd config on cobbler.
>>>> I know nothing about teamd. What needs to get configured on a
>>>> target machine?
>>>> Orion Poplawski
>>>> Technical Manager 303-415-9701 x222 
>>>> NWRA/CoRA Division FAX: 303-415-9702 
>>>> 3380 Mitchell Lane or...@cora.nwra.com
>>>> Boulder, CO 80301 http://www.cora.nwra.com
>>>> cobbler mailing list -- email@example.com
>>>> To unsubscribe send an email to cobbler-le...@lists.fedorahosted.org
>>>  tel:303-415-9701%20x222
>>>  tel:303-415-9702
>>> cobbler mailing list -- firstname.lastname@example.org
>>> To unsubscribe send an email to cobbler-le...@lists.fedorahosted.org
>> cobbler mailing list -- email@example.com
>> To unsubscribe send an email to cobbler-le...@lists.fedorahosted.org
cobbler mailing list -- firstname.lastname@example.org
To unsubscribe send an email to cobbler-le...@lists.fedorahosted.org